Perth-WRX.com

Perth-WRX.com (http://www.perth-wrx.com/vb/cmps_index.php)
-   Mechanicals (http://www.perth-wrx.com/vb/mechanicals/)
-   -   Stroker kit or JDM EJ20 sti v5? (http://www.perth-wrx.com/vb/mechanicals/37870-stroker-kit-jdm-ej20-sti-v5.html)

Ca6139uY 20-10-2010 03:11 AM

Stroker kit or JDM EJ20 sti v5?
 
I've got an engine on hold from Canada 2000 JDM STI EJ20 version 5 done 65000kms.
now if u had about $5000 would u go for the JDM or stroker kit? and rebuild current engine EJ207 thats done already +200000kms(non sti)??

V3 RA 20-10-2010 03:38 AM

new 207, service heads, done. But will cost a bit more than 5k

What are your goals for the car? What power levels are you chasing?
All these questions and more will need to be answered in order for proper advice to be given.

You won't be able to build a 2.2 stroker for 5k, in fact that won't even get you a stroker kit, let alone the labour to build it etc.

mARC 20-10-2010 08:46 AM

^^

whs + Its not like you can get any guarantee on am a used import motor.

Save a bit more and either rebuild a reliable EJ207 with local parts or get a motor from a local importer with some form of guarantee.

Sounds like you're either hearing stories or wanting some Wizard to grant you cheap bolt on power (only wish this was possible).

Avalanche 20-10-2010 09:41 AM

stroker kit +$10000

EXPLICIT 20-10-2010 01:39 PM

Drive in Drive out 207 swap is ~7k. Remember if you do an engine swap you still need labour to put it in and out. By the time you do it.......refer to what V3_RA said above.

astralex 20-10-2010 02:48 PM

Lol, I bought a stroked 2.2 for around 5K. :p

V3 RA 20-10-2010 03:36 PM

[QUOTE=astralex;503254]Lol, I bought a stroked 2.2 for around 5K. :p[/QUOTE]

key word = build!
Im sure you can buy an already built/used motor for 5k, but as far as buying a 'decent' kit and the building it, 5k will not cut it!

astralex 20-10-2010 07:28 PM

Zing, plus one for catching me out when I'm not looking... you sly fox you! In that case, no, you won't be able to build one for that kind of money.

type25 20-10-2010 08:03 PM

there are a few wrongs in your comments

[QUOTE=Ca6139uY;503101]I've got an engine on hold from Canada [COLOR="Red"]2000 JDM STI EJ20 version 5 done 65000kms.[/COLOR]now if u had about $5000 would u go for the JDM or stroker kit? and rebuild [COLOR="Blue"]current engine EJ207 thats done already +200000kms(non sti)??[/QUOTE][/COLOR]

[COLOR="Red"]firstly a 2000 STI engine is version 6.[/COLOR]

[COLOR="Blue"]EJ207 non sti = wrong!

'207's are STI[/COLOR]

Ca6139uY 02-11-2010 09:59 AM

[QUOTE=V3 RA;503102]new 207, service heads, done. But will cost a bit more than 5k

What are your goals for the car? What power levels are you chasing?
All these questions and more will need to be answered in order for proper advice to be given.

You won't be able to build a 2.2 stroker for 5k, in fact that won't even get you a stroker kit, let alone the labour to build it etc.[/QUOTE]

well more power 300hp would be reasonable for now. i think i'll do a swap 2000 JDM STI engine is currently on order 65000kms got for 4k and gonna cost me 2500-3000. to get it put in that's with new belts, bearing, fluids, what do u guys think?

[QUOTE][COLOR=Red]firstly a 2000 STI engine is version 6.[/COLOR]

[COLOR=Blue]EJ207 non sti = wrong!

'207's are STI[/QUOTE][/COLOR]

Sorry My engine is EJ205


All times are GMT +8. The time now is 05:58 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO