ic water spray
 

hey guys/galz

my car came stock with an ic water spray system, but the bottle is in the boot behind the guard with only the opening visable, so i have to guess when its full.

so my idea is to rig up an autometer fuel level gauge to it therefor i can see how full it is.

is this possable?

Should have an indicator light on the dash when it is low. When you see that, turn it off until you have a chance to fill it.

In my car (02 STi) it has a display on the dash 'I/C Water Spray' when it's running low. You generally get a warning when it's low-ish and you corner hard before it gets stupidly low.

yes i have the light, but i mean when filling the bottle as not to over flow it on to my shiny things.

take the plunge and put in measured amounts of 0.5L, till you get a little spillage, then you'll know.

damn thats not a bad idea. cheers guys.

omg. you can tell when its full by watching/hearing the water flow into the bottle
stop being such a noob to find an excuse to fit a water gauge to your car

oh ok and what about when subs n amps are blocking it so i had to make a pipe go to it from another angle.
ffs.

why not make a sight glass on the side?
tap one hole at the top (2cm from top) and one at the bottom (2 cm from bottom), put a plastic tubing between the two and instant vision
a gauge will use the same principle

[QUOTE=Hi_VoLtAgE]oh ok and what about when subs n amps are blocking it so i had to make a pipe go to it from another angle.
ffs.[/QUOTE]
dude..you get a fukn funnel or something
fark