|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
stripped nuts
Hey all,
Getting my engine out at the moment and im having a problem, basicly the nuts that hold the engine down to the cross member just behind the gearbox are fairly stripped. They still have a little bit of a lip on them, so what ive done so far is sprayed them with some WD40 and let it sit (letting it sit overnight), this is the last thing i have to do before i can get the engine out, does anyone have any idea on how to get these 2 nuts off easily, or the best way it can be done? Any help will be much appreciated. |
#2
|
||||
|
||||
If the captive nuts are stripped then they will have to be replace anyway, last time I had this I just used a bit of leverage whilst turning the bolt until it worked free.
__________________
RIP POSSUM 3" Invidia Zorst |
#3
|
||||
|
||||
Grinder.
__________________
221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600 EBISU SUBARU, SHIBUYA-KU TOKYO |
#4
|
|||
|
|||
There is two engine mounts left and right, the nuts are on the under side of the engine crossmember to get the motor off the xmember. If these are really stuffed , there is two bolts holding the metal plate to the engine mounts, undo these.
all ways use a impact socket as it drives on the flats, not a standard socket found in your every day socket set as you have more chance to stuff ( round ) the nut. This is a must for the turbo nuts. If all the fails call your mother..... she may not be able to help but in return she will think its nice you called her. |
#5
|
||||
|
||||
As seagull has said, use single hex sockets.
|
#7
|
||||
|
||||
All sorted forces impact socket one size smaller in both and got it off...
Now im getting new one in and engine mount bolts wont line up now :S bit annoying because i have to dis-engage clutch again and pull away from gear box but i should have it in all good tomorrow |
#8
|
||||
|
||||
take a tube of veet and apply liberally. wait ten minutes ( but no longer), then rinse. walla! stripped nuts
|
#9
|
||||
|
||||
whatever you do... don't veet your nuts!
__________________
Twin scroll Pig Bi-Squeeling |
#10
|
||||
|
||||
I passed out at my sister's place once and the bitch put that shit on one of my eyebrows. Lucky I woke just as she finished or I would have lost it...
|
Tags |
nuts, stripped |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KKR Forged Wheel nuts group buy Part Deux.. 12 x 1.5 and 12 x 1.25 mixed!! | BALISTC | Non Commercial Group Buys | 37 | 02-10-2010 01:31 PM |
lock nuts | NVRENUF | Non-WRX Discussion | 7 | 12-06-2009 08:25 AM |
Project Kics - Made in Japan wheel nuts, hub rings, spacers, valve stems, valve caps | Vision R | The Former Workshops Forum | 0 | 15-05-2009 08:28 PM |
Wheel Nuts for New Rims | epill | Cosmetic | 2 | 07-07-2008 10:31 PM |
Work wheel nuts | BN01 | Cosmetic | 11 | 09-08-2007 10:06 AM |