|
|
LinkBack | Thread Tools | Display Modes |
#21
|
|||
|
|||
All back together so was time to drop it on
Just a couple hours to go now |
#22
|
|||
|
|||
Overkill on the Rocker cover sealant bud! Haha
Keep up the good work either way!
__________________
MY06 STi |
#23
|
||||
|
||||
Quote:
using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport |
#24
|
|||
|
|||
Yeah when it squished it showed we had too much although we tried to be light lol won't hurt
No I'd have to say that isn't true. We used it for holding gaskets in place, facing sealant etc on intake. Doesn't hurt anything and helps seal every small piece. |
#25
|
|||
|
|||
Engine is in, turning and won't start. Have fuel in the rails but obviously a spark issue somewhere.
Knew it couldn't go smooth hahaha |
#26
|
||||
|
||||
Plenty of support here if you need it,
Some experts in this field.... Seagull, Rossco, to name a couple.... |
The Following User Says Thank You to matto20v For This Useful Post: | ||
Viper76 (10-04-2015) |
#27
|
|||
|
|||
Freshen up
Love some! Happy to pay if they can come look at it. Car is in forrestfield or anything o look for.
Camshaft timing is probably first question. We lined up the single lines on the cam cogs to the single lines on the covers. This meant the double lines basically met each other. Hope that is right as that's what I read on naisoc. Last edited by Viper76; 10-04-2015 at 06:50 PM. |
#28
|
|||
|
|||
On sent
|
#29
|
|||
|
|||
So update
Still no spark. Rechecked the timing as I thought it was out. Was spot on, cam and crank sensors changed, put a pulse on the injector and that lit up so sensors are definitely working. Still have not one ounce of spark to fire this puppy up. All plugs to ecu checked again, pulled apart and then pushed til the click. Apart from the 2 sensors, what else makes these cars spark? I'm thinking maybe my coil has died but I'm led to believe that is near on impossible. I'll take any suggestions Oh and if someone lives around Guildford or Ellenbrook can I borrow a coil to test for 1/2 hour. Cheers Viper |
#30
|
|||
|
|||
Freshen up
Well all sorted and now running!
Lesson for beginners. Mark injectors 2/4 and cam sensor as all plugs are the same. Had cam sensor plug on injector. Last edited by Viper76; 16-04-2015 at 10:11 PM. |
Tags |
freshen |
|
|