99 wrx seized engine.
Wrx engine seized today, so im looking at ej207 semi-closed block rebuild and using my99 heads. any advice?
|
You need arp 625+ headstuds
|
[QUOTE=Tony;825812]You need arp 625+ headstuds[/QUOTE]
HAHAHAHAHAHAHAHAHAHAHA :wav: |
the arp 625+ headstuds are quite expensive$$. Perhaps i needed these installed in the ej205 and if wouldn't of died on the dyno today.
|
Why did it seize?
|
Not sure why, just died after couple power runs while idling. Oil has small metal partials and engine seized now.
|
Probably mechanical failure inside engine. bearings.
Looking forward, i've always wanted ej207. |
Mao ?
|
No it wasn't Mao.
|
I'm doing same build now on my 99 Sti. Fucked last engine and re using my heads.
Bought EJ207 semi closed deck from rising Sun Subaru $2300 delivered. RCM 11mm Oil pump, cosworth timing belt kit, RCM baffled oil sump and RCM catch can,RCM head gaskets $3500 delivered. (Roger Clark motorsports UK) New oil cooler from subaru $400 I think Sent out heads to be serviced and whatever else they do $600 Buying cams and springs now but only cause I found a cam slightly cracked during build last week. And about $1000 from local Subaru for gaskets and seals and brackets I needed and what not. Hope this helps for your next build! Just make sure change as much as you can for oil system or thoroughly clean parts. 100% change oil pump and cooler. using the Perth-WRX mobile app |
All times are GMT +8. The time now is 06:03 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO