Perth-WRX.com  

Go Back   Perth-WRX.com > Technical > Mechanicals
Register Diddy Kart ArticlesAll AlbumsBlogs FAQ Community Calendar Today's Posts Search


Welcome to Perth-WRX, click here to register!

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-06-2017, 06:26 AM
Scoobie Noobie
Member
 
Join Date: Aug 2016
Location: Sydney
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
adrock at standard level
Default 2008 WRX - New vs Rebuilding Engine

Morning all,

I have a reasonably modified 2008 WRX (described below) and the situation as of this week is my #4 cylinder has lost compression. Recommendation from my mechanic/tuner is to rebuild the engine with forged parts.

Some car details:
- Owned for about 5 yrs (stock when purchased)
- 120k km
- Major service has been done
- Mechanically the rest of the car appears in good shape
- 240kw atw (not chasing more power, but a little flexibility for the future would be good)

Mods (I'm pretty loyal and all have been done by same Sydney based mechanic/tuner across the years):
- Blouche 1.5XTR Dominator Turbo
- TurboSmart Adjustable Waste Gate Actuator
- PW Verticooler
- High flow fuel pump
- 1000cc injectors
- TBE
- CAI
- BOV
- Subaru 4-pot calipers, RDA slotted rotors + RDA performance pads
- GFB Short Shifter
- .....next would have been sway bars / suspension mods.....but alas....

I have called around seeking various options to move forward. In summary thus far:
- Rebuild existing engine with forged parts (~$10-$12k, including tune)
- New EJ257 shortblock with forged STI crank, forged Cosworth rods and pistons (plus oil pump, gasket kits etc) ($11-$12k, including install & tune)
- New stock STI EJ257 shortblock ($7k, including install & tune)

Frustrating situation so any experience, thoughts or feedback would be great. Ultimately I'm after the best bang-for-buck solution that will reliably handle the current power. I don't particularly wan't to be back here again facing another rebuild.

Many thanks,
Cheers.
Reply With Quote
  #2  
Old 01-06-2017, 07:32 AM
nick73's Avatar
Subaru Tech Division
Member
 
Join Date: Feb 2011
Location: cubicle 2
Posts: 1,300
Thanks: 139
Thanked 91 Times in 87 Posts
nick73 is a gurunick73 is a guru
Default

Forge it, that's too much power for a oem 257 in my opinion.

If you can get the Cosworth parts at reasonable prices go for it, otherwise there are plenty of cheaper worthy alternatives.

Prices for the rebuild seem about right so far.

Good luck!
__________________
Bye bye betty blue. Hello F6.
Reply With Quote
  #3  
Old 01-06-2017, 07:46 AM
Flat Four Father
Member
 
Join Date: Dec 2005
Location: Kewdale
Posts: 2,077
Thanks: 3
Thanked 65 Times in 48 Posts
seagull knows their stuff
Default

Speek to Neil Herbit at the engine shop in canning vale

I think the next Wrx club meet is there
Reply With Quote
  #4  
Old 01-06-2017, 07:52 AM
Goosey's Avatar
WRX Hi Five Club
Member
 
Join Date: Apr 2013
Location: Under a rock
Posts: 296
Thanks: 6
Thanked 17 Times in 16 Posts
Goosey at standard level
Default

Quote:
Originally Posted by seagull View Post
Speek to Neil Herbit at the engine shop in canning vale

I think the next Wrx club meet is there
Might be a bit of a hike, as the OP appears to be in Sydney.

using the Perth-WRX mobile app
Reply With Quote
  #5  
Old 01-06-2017, 08:40 AM
Flat Four Father
Member
 
Join Date: Dec 2005
Location: Kewdale
Posts: 2,077
Thanks: 3
Thanked 65 Times in 48 Posts
seagull knows their stuff
Default

Neil sends motors there monthly
Reply With Quote
  #6  
Old 01-06-2017, 09:12 AM
Scoobie Noobie
Member
 
Join Date: Aug 2016
Location: Sydney
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
adrock at standard level
Default

Thanks for the input fellas, appreciated. Will definitely give Neil a buzz to get his thoughts, and good to know re him servicing Sydney clients too.

I didn't think that a drop-in STI stock engine would be up to it, but was suggested as an option from one guy a called.

With the forged path, given that the price of rebuilding my existing engine is comparable with a new EJ257 with forged parts (assuming good pricing on parts), what is the better route you think? Could the rebuilding quote on existing engine be a tad high or overspec'd for what I need?

If i'm going to drop $12k on a rebuild I want to know I'm getting better value over a new engine. Else dropping approx the same amount on a newbie is making more sense.

Cheers.
Reply With Quote
  #7  
Old 01-06-2017, 10:48 AM
shaunus's Avatar
WRX Hi Five Club
Member
 
Join Date: Aug 2009
Location: Kalgoorlie
Posts: 200
Thanks: 4
Thanked 6 Times in 6 Posts
shaunus at standard level
Default

Mine runs 240kw everyday. Loves it.....so far
Reply With Quote
  #8  
Old 01-06-2017, 01:10 PM
snakeeyes's Avatar
Potty Training Scoobie Noobie
Member
 
Join Date: Apr 2013
Location: Perth
Posts: 73
Thanks: 12
Thanked 3 Times in 2 Posts
snakeeyes at standard level
Default



That's with a stock ej257 engine with only a tune and process west top mount intercooler


Sent from my iPhone using Tapatalk Pro
__________________
If you don't go crazy once in awhile you'll go crazy permanently !
Reply With Quote
  #9  
Old 01-06-2017, 01:11 PM
snakeeyes's Avatar
Potty Training Scoobie Noobie
Member
 
Join Date: Apr 2013
Location: Perth
Posts: 73
Thanks: 12
Thanked 3 Times in 2 Posts
snakeeyes at standard level
Default

Oh it's a 2007 Hawkeye sti


Sent from my iPhone using Tapatalk Pro
__________________
If you don't go crazy once in awhile you'll go crazy permanently !
Reply With Quote
  #10  
Old 01-06-2017, 02:39 PM
JRecardo's Avatar
STI Master
Member
 
Join Date: Jul 2012
Location: Perth
Posts: 538
Thanks: 24
Thanked 25 Times in 25 Posts
JRecardo at standard level
Default

While you're at this cross road you might as well spend the extra and rebuild the engine to surpass oem specifications. You might be fine with an oem shortblock for years to come, or you might find it suffers the same fate in months and you find yourself back at the beginning and reaching for your wallet again. Do it once, do it right.

Research builders carefully and have a chat to them about your options. The engine shop have done some very good work for people I know and would be an option I'd consider.
__________________
MY08 WRX 325hp/456nm/18psi E85
Reply With Quote
Reply

Tags
2008, engine, rebuilding, wrx


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
match this chasis number! V5 STi R General Subaru Discussion 19 27-10-2014 01:13 PM
heaps and heaps of wrx parts riceman1991 For Sale 8 29-05-2014 06:26 PM
new engine in the wrx Blackmagic09 Introductions 3 08-03-2014 04:37 AM
Wrx Sti engine numbers VUSSUTE General Subaru Discussion 1 29-10-2013 07:57 PM
Rs or early WRX engine Guyph_01 Wanted 0 26-05-2010 10:03 PM



Welcome to Perth-WRX, click here to register!

All times are GMT +8. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO