Conversation Between Wildbill and kche77
Showing Visitor Messages 1 to 2 of 2
-
tony knight in SA has a CNC progam for 99 onwards heads and finishs by hand
kelford 272 cams, 1mm larger valves,
tony rebuilt the heads
shims are part of the bucket, no loosing a shim at high rpm
i didn't get them flow tested, as this has been done before.
iam making 630hp and me mate with same heads is making 750hp with even more tap if required. if chasing power use large pipe headers, port match all intake and exhuast
Ron
-
Hi,
Can you let me know full build spec of the heads and if you have flow test the heads?
What kind of cams, springs, valves etc etc.
Thanks. Kenny