R180 diff, shafts, hubs, rotors and GD arms. - Perth-WRX.com

Mister Two · #1 02-11-2010, 11:02 AM

4.44 R180 Diff
STI 2 way Plate LSD

$750 ono

Set of R180 shafts, hubs, rotors and arms.
I dont want to separate this set of gear.
Came off a GDB Gravel Spec STI-RA
GDB R180 shafts
GDB Lateral arms with C-links
R180 hubs - NON ABS - Pretty much the same as the V5/6 STI-RA R180 hubs. Suit bolt on Subaru 2 Pot calipers
Rotors to suit the above hubs - Vented Rotors. 290mm diameter with a 190mm hand brake drum - Very good condition. Suit subaru 2 pots. (Not Brembos). Still the full 18mm thick. Barely used but could use a skim to take off the surface rust.

$900 ono for the LOT.

BALISTC · #2 02-11-2010, 12:12 PM

What is required to get the tone rings to fit??

Can I fit my stock ones or do I need to purchase special ones?

BALISTC · #3 02-11-2010, 12:14 PM

Also when you say lateral arms, do you mean these, or just stock ones?

trainwrex · #4 02-11-2010, 02:19 PM

^^^

hahah very doubftul Joe.. Id sau just standard GD lateral arms with different links..

Mister Two · #5 02-11-2010, 03:46 PM

Comes with C-links. So its just standard arms.

To put a tone ring in you need to press off the stud plate and drill holes in it for the mounting bolts for the tone ring. I don't know if you can use R160 tone ring. I suspect not.

Mister Two · #6 05-11-2010, 05:02 PM

It seems I made a mistake. What I mistook for the bung in an ABS sensor mount wasnt that at all.

The R180 hubs are NON ABS. They can still be modified to take ABS sensor and tone ring, but its a pain in the ass.

These hubs would be good for someone who wants to put 2 pot or brembo calipers on a NON ABS RS Liberty, or V1/2/3/4 RA.

Mister Two · #7 10-11-2010, 09:44 AM

Bump...

Mister Two · #8 26-11-2010, 11:38 PM

Bump... ABS is for the feeble

R180 hubs, shafts, arms and rotor kit SOLD