All My Old Stereo Gear For Sale One Low Price - Perth-WRX.com

Haggis · #1 01-02-2007, 11:15 AM

OK Ive got to get rid of this gear to clear out the garage. this stuff is awesome gear and i doubt ill ever use it again. Its all in fantastic working condition.
With this gear I scored 147.1 dB at the last RB CAD comp many many moons ago. I also took out first place at Motovation 2004.

Im asking $1000 for the lot.
Will not Seperate. Sorry.

Email me on haggis1@iinet.net.au

Heres the only info that i could dig up on everything:

Odyssey 400 CCA & 600 CCA Batteries

The 400CCA used to be in the engine bay of my old CRX.
The 600CCA was kept in the back with the stereo gear.
Great batteries worked wonders for my sound system.
Got some paint scratched off the small one from a dodgey install other than that its in good condition.
Havent used them for a long time now but kept them fully charged.

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++

2x DLS 12" Subs in box

Not too sure if i want to sell this thinking about puttin it into my WRX but not too sure yet.
This was my pride n joy. I love this sub box with all my heart.
Its personal best SPL score 147.7dB at the last Rollaboyz RBCAD Sound Off at Alberts in Morley
with the help of a DLS D class amp (which also might be for sale) and also took 1st place at Motorvation 2004
and managed to rattle a few of my mates brains

So here it goes:
The total package cost me approx $1800 a the time (2x $700 for each sub, $400 for the Box)

Will NOT disappoint!!!

Some details on the subs themselves:

Impedance : 4 ohm
Size : 12" (30 cm)
Power handling capacity : 400 W RMS / 600 W max
Frequency range : 20-2000 Hz
Sensitivity : 91 dB (1W/1m)
Magnet size : 180 mm (7,1"), 140 oz
Outer diameter : 310 mm (12,2")
Installation depth : 142 mm ( 5,59")
Mounting hole : 282 mm (11,1")
Weight : 8,9 kg (19,6 lb
X-max : +- 9 mm (0,35")
Fs: 31,7 Hz Re: 3,57 Qes: 0,24 Qms: 2,14 Qts: 0,21 BL: 18,94 Vas: 60,2 l (2,12 cuft)
Recommended vented enclosure : Volume 32 liter/1,13 cuft, Port: 4" diameter with length 37 cm/14,5". F3= 49,1 Hz
Recommended sealed enclosure : For best result, use vented enclosure

+++++++++++++++++++++================+++++++++++++ +++++++++

DLS D 1000 Mono Amp

This was the amp that helped win a few Spl comps
One of the best thigns i bought for my sound system.
Never over heated and provided me with hours of enjoyment
as i felt my brain dance in my skull as it pumped power into my subs
Hasnt been used for a while as i ahvent had time to do any sound work to my WRX

Comes with orignal box, manual and a Remote Bass Controller (that never got used)

Some info about the AMP:

RMS output per channel at 14,4 volts
Mode : D
Number of channels : 1
Power output in 4 ohm (0,3% THD) : 350 Watts
Power output in 2 ohm (0,5% THD) : 700 Watts
Power output in 1 ohm (1 % THD) : 1000 Watts
Frequency range : 15 Hz - 160 Hz
S / N-ratio, A-weighted : > 80 dB
Damping factor 4 ohm 100 Hz : > 300
Input impedance : 22 kohm
Input sensitivity, variable : 0,2 - 6 V
Bass bost : 0- +18 dB
Lowpass crossover : LP: 35 - 250 Hz
Subsonic filter : 15 - 35 Hz
Power consumption, idle : 0,9 A
Maximum power consumption : 97 A
Dimensions H x W x D : 65 x 407 x 240 mm
Weight : 5,4 kg

++++++++++++++++++++++++++++++++++++++++++++++++++ +++++

DLS Reference 200A 4 channel Amp

I ran my CDT splits off this amp and it was F**kin amazing.
Hasnt been used in awhile but is in perfect working condition jsut been sitting in hibernation
for a while. Again only gonna sell it if someone wants it :P if not ill eventually get off my ass
and install it into my WRX

Comes as is as i lost the box

This info is form the DLS website some of the stats would have changed
but its along the same lines:

RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion.
Mode : AB
Number of channels : 4
Power output in 4 ohm : 4 x 75 Watt
Power output in 2 ohm : 4 x 110 Watt
Power output in 4 ohm bridge mode : 2 x 220 Watt
Frequency range : 10 Hz - 50 kHz
S / N ratio, A-weighted : > 100 dB
Damping factor : > 200
Input impedance, low level input : > 10 kohm
Input impedance, high level input : 330 ohm
High level input with auto start function : Yes
nput sensitivity, variable : 0,2 - 7 V
Grand bass filter : variable 0 - 18 dB
Variable phase shift control for subwoofers : variable 0 - 180 degrees
Filter, highpass, variable : 20 - 150 Hz on all channels
Filter lowpass, variable : 40-125 Hz on ch. 3/4
Filter slope : 12 dB/octave
Current draw, idle : 0,9 A
Current draw, maximum : 50 A
Dimensions W x D x H : 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch)
Weight : 4 kg ( 8,8 lb)

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++

CDT 2 Way Splits

I have no info on these other than theyre kick ass splits sounded amazing and could handle a hell of a punch.