Looking for a piece of Carbon to make a switch panel. Needs to be large enough to Fill the DIN Slot with everything removed so about 100mmx100mm

Thanks
Scott

__________________
I used to tune cars with screwdrivers.
Clutch, Brake, Accelerate.

Did you have any luck?
I know Jaycar have plastic plates din size if one of those will do until you get some bling. Might be handy to template something up before you cut into a CF sheet.

I also wouldn't mind knowing where we can get CF locally.

Try Windrush yachts Scotty, he's bound to have off cuts laying around.

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Make it out of plastic then cover with some CF vinyl that i've got here... it looks very real unlike all the other 'sticker' stuff you see.

__________________
Craig.
INCAR 101

(08) 93 555 101

Unit 1, 25 Forward Street,
East Victoria Park,
WA 6101.

Guys he fully aware of how to make crappy fake ones, he's after
info on the real deal as the title says!

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

I've ended up making it from Ali as it's just easier as I have access to a water jet so it's done now.. Thanks for playing

__________________
I used to tune cars with screwdrivers.
Clutch, Brake, Accelerate.

i would suggest maximum motorsport

My guy could make it for you.. Use ur ally mould and he can wrap it and then release it as a single carbon piece.

Name is fastacraft.. person is John to speak to..

__________________
I'm a jockey kunts...

I'm just going to stick to ali for now I will cut it out of cf when I lay my own for something else.

__________________
I used to tune cars with screwdrivers.
Clutch, Brake, Accelerate.