Hi all,
Chasing anyone out near the swan valley or has one their willing to lend of a Air compressor with Rattle gun / and or impact driver / gun...

Trying to install new alloy control arms, plus ALk & Roll centre kit.. But the bloke who owed it before me has put a H brace on it and he must have big guns and a little cogger, as by hand plus a bit of Lube, I cant get her to budge and she aint going no where......

happy to supply beer for your kind assistance...

Cheers
Ashley
0400 249 407

You'll need a pretty decent gun & compressor, better off getting it higher off the ground and use a decent length of tube/pry bar on it, maybe he used loctite too.

__________________
Beaten up old 98 Gen 2 Liberty, 13.0, stock V3 STI running gear.
07 Transit motor home
69 VF & 70 VG Valiants needing full restoration
Yamaha Zooma 50cc rocket hopefully going with the Transit.

Hey mate,

I have a compressor & rattle gun. its not the best but you are welcome to try it if you like? I am in Eden Hill, just next to Bassendean. To be honest though, Tom is probably correct in what he is saying. Get a long breaker bar, or a longer tube / bar to go over the wrench handle and use a bit more leverage force. Sometimes a good couple of whacks on the end of the stud can help also.

PM me if you want to come and grab it, but it is only a cheap compressor & rattle gun.

__________________
Cheers,

Simon.

Hi gents,
Appreciate the feedback..
Ive got it up on stands at the moment, next option is to take it to a hoist, but while all the other shyzzer is being replaced, be nice to finish these off.. My other concern is rounding off the heads, I had 2 goes today before I stopped myself, and it already looks a little suss.. Tried the old tap tap with a hammer and some crc lubrication before second go...

Cheers.

Ashley

could drive it to rattle gun location, loosen, then snug tighten again, drive home.

i have a/c + rattle gun. in parmelia

__________________
[I]Personal chef[/I]

Yeah thats a last resort when she goes into Mao's in coming weeks.
Its a track car, so needs a trailer to get mobile, too much dicking around at this stage..
trying to have what I thought were going to be "easy little jobs" done while I wait for Cage to be finished and then before Mao gets at it..

Cheers though.

Coming out rallying again Ash or staying on the black top?

__________________
[B][COLOR=navy][B][COLOR=navy]Rally Driving Perth[/COLOR][/B][/COLOR][/B][COLOR=navy]
[/COLOR][COLOR=blue]www.rallyaction.com.au[/COLOR]
[SIGPIC][/SIGPIC]
[COLOR=navy]Rally Action Driver Training[/COLOR]

Hello Mate,
Na not at this stage, gunna keep it to black top speed events and the like, and will look towards Imporved production or Street cars up at Barbs next year...

Get my rally fix for now, veiwing from a distance with the Harpers, Pete & Wazza's occasional outing...
Trust you and the family are well..

Cheers

I'm in Middle Swan and have a compressor and rattle gun that you're more than welcome to borrow. However, like Tom said, you'll get more torque with a socket and breaker bar than a rattle gun (well, my cheap rattle gun at least).
Still, the offer's there.

__________________
Signarape!

Another one converted to the Dark Side

__________________
[B][COLOR=navy][B][COLOR=navy]Rally Driving Perth[/COLOR][/B][/COLOR][/B][COLOR=navy]
[/COLOR][COLOR=blue]www.rallyaction.com.au[/COLOR]
[SIGPIC][/SIGPIC]
[COLOR=navy]Rally Action Driver Training[/COLOR]