MY07 pics
1 Attachment(s)
Hi all finally a few pics of my car
|
1 Attachment(s)
Taken today
|
1 Attachment(s)
Also taken today
|
Very nice car, black on black = win :)
|
I've had it from new, this year is 6 years I've had it and still has only 21700k's, due to me also having a company car.
|
...
|
Very nice tidy looking car..
BLACK ON BLACK you'll fit in here perfectly around here :P Just remember resist the temptation of DIY mods Always check with members first :) |
[QUOTE=crawl3r;749353]crazy low k's :) what mods have you done to it over the past 6 years.
would love to see what condition this is in, to compare to mine.[/QUOTE] I've been buying my mods none installed yet but in a month it will have A Cobb short ram intake Cobb lightweight crank pulley 3" TBE Xforce exhaust Bilstein PSS9 coilovers DBA 5000 front and rear slotted brake rotors And coming to Perth to tune it |
...
|
[QUOTE=Tiigga;749354]Very nice tidy looking car..
BLACK ON BLACK you'll fit in here perfectly around here :P Just remember resist the temptation of DIY mods Always check with members first :)[/QUOTE] Thanks I ask about everything I'm about to do you guys have some of the best experience I've read out of all the forum sites |
[QUOTE=crawl3r;749357]i recon go for the DIY mods.....most people here just pay everyone to do their work, do it yourself, learn more about your car. If you just drop your car at a shop every time to get stuff done your not learning anything.
Simple things like changing oils, fitting aftermarket parts ect ect can all be done in your own garage, if need be get it checked over by a professional later or get some of the forum members that have done things before to give you a hand. do as much as you can yourself ;) that's my opinion[/QUOTE] Sure i can do some of the mechanical but I pass my mod ideas around here first |
...
|
[QUOTE=crawl3r;749360]good good :) this forum is awesome for advise, just remember to mod your car how you want it, not how others want it haha[/QUOTE]
Oh yes I know what I want eventually, so with every power mod I plan a handling mod to go with it I'm not one for power first then handling :) |
...
|
[QUOTE=snakeeyes;749355]I've been buying my mods none installed yet but in a month it will have
A Cobb short ram intake Cobb lightweight crank pulley 3" TBE Xforce exhaust Bilstein PSS9 coilovers DBA 5000 front and rear slotted brake rotors And coming to Perth to tune it[/QUOTE] I'm sure others with more knowledge than me can confirm, but if I were you, I would get the exhaust and intake installed in Perth at the same time as getting it tuned. I fear that a drive from Karratha to Perth with those two mods fitted and no tune might cause you some issues. Or are you transporting it down to keep the k's off? With mine, the exhaust was ok, but the intake made it run nasty on my short trip to ASG. I'll be sure to look out for this black-on-black beast whenever I'm in K-town...it must stand out like dogs balls being one of the few tidy cars up here! |
[QUOTE=crawl3r;749363]what power figures are you chasing? and who have you got in mind to tune it? im interested to see what benefits the Cobb lightweight crank pulley would have also[/QUOTE]
Well looking at all a few places, Revlimit, Race Torque or allstar. The lightweight pulley is from old Skool mod thinking,(the more you lighten the mass that the engine has to drive it aids in power to the wheel no matter how small the gain) |
[QUOTE=snakeeyes;749368]Well looking at all a few places, Revlimit, Race Torque or allstar.
The lightweight pulley is from old Skool mod thinking,(the more you lighten the mass that the engine has to drive it aids in power to the wheel no matter how small the gain)[/QUOTE] I'm looking at 280 to 300 or so atw for a start, but got to do the pistons and conrods to make it reliable |
[QUOTE=JamieBlade;749367]I'm sure others with more knowledge than me can confirm, but if I were you, I would get the exhaust and intake installed in Perth at the same time as getting it tuned. I fear that a drive from Karratha to Perth with those two mods fitted and no tune might cause you some issues. Or are you transporting it down to keep the k's off?
With mine, the exhaust was ok, but the intake made it run nasty on my short trip to ASG. I'll be sure to look out for this black-on-black beast whenever I'm in K-town...it must stand out like dogs balls being one of the few tidy cars up here![/QUOTE] Thanks Jamie, Will be putting it on a transport to Perth I have the same fear It turns some heads but everyone up here is used to it now |
[QUOTE=snakeeyes;749371]Thanks Jamie,
Will be putting it on a transport to Perth I have the same fear [/QUOTE] Can remember driving to Karratha 3 times a year with my old job and lost count of the NEAR misses we had with local/imported animals :eek::eek::eek: on the roads between Geraldton/Carnarvon/Karratha.... |
[QUOTE=crawl3r;749357]i recon go for the DIY mods.....most people here just pay everyone to do their work, do it yourself, learn more about your car. If you just drop your car at a shop every time to get stuff done your not learning anything.
Simple things like changing oils, fitting aftermarket parts ect ect can all be done in your own garage, if need be get it checked over by a professional later or get some of the forum members that have done things before to give you a hand. do as much as you can yourself ;) that's my opinion[/QUOTE] I certainly agree.. I was implying the CHEAP :rolleyes: NASTY :eek: SHOCKING :o DIY mods that have been done on Wrxs that we all see from time to time around the streets/highways of Perth.. :) |
...
|
1 Attachment(s)
Bilstein coilovers installed set at 5 which is just over half as adjustment max is 1
Rides very very good firm but comfortable for daily drive. New ride height 25mm lower than stock. |
looks good mate. black rims way to go with brembos.
|
1 Attachment(s)
Really improved handling
|
[QUOTE=RichX;750956]looks good mate. black rims way to go with brembos.[/QUOTE]
Thanks Richx plan is to black out the whole interior too |
1 Attachment(s)
Update
|
red dust engine bay! mine was the same when i had it in the kimberleys!
|
[QUOTE=drewgong;755039]red dust engine bay! mine was the same when i had it in the kimberleys![/QUOTE]
Pain in the arse....wash the in the morning fine red dust on it by evening |
Finally got the whiteline 24mm adjustable XHD front and rear sway bars installed with the XHD mounts and the anti lift kit installed too
Now it has brought too light that a strut mount bush needs changing so I'm going N type |
Think I saw this the other day while heading through port headland looked sexy.
|
[QUOTE=DukeDrifter;757298]Think I saw this the other day while heading through port headland looked sexy.[/QUOTE]
Lol in Port Headland no in Karratha yes |
They all blur into one, travelled 3700kms since Monday :P
|
[QUOTE=DukeDrifter;757301]They all blur into one, travelled 3700kms since Monday :P[/
Hoping to move to Perth this year so you may see it then |
[QUOTE=snakeeyes;757304][QUOTE=DukeDrifter;757301]They all blur into one, travelled 3700kms since Monday :P[/
Hoping to move to Perth this year so you may see it then[/QUOTE] Prett sure it was yours, karratha Wednesday, port headland Thursday, Newman Friday :P |
Yes must have been then its a bitch to keep clean up here tho
|
[QUOTE=snakeeyes;757306]Yes must have been then its a bitch to keep clean up here tho[/QUOTE]
Yeah the red dirt absolutely gets everywhere. |
[QUOTE=DukeDrifter;757310]Yeah the red dirt absolutely gets everywhere.[/QUOTE]
Yep air filter cops it big time |
Update moving to Perth so hope to finally Meet some of you good people from the site
|
1 Attachment(s)
New pics
|
1 Attachment(s)
Snakeeyes
|
All times are GMT +8. The time now is 06:56 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO