I swear that custard is lost in the foresters. Lol

__________________
race tape y pipe running .05 bar till spares turn up.

Dan, when you're at MMS talk to Rob about the quick rack he bought from my Spec C....he was going to put it on the Safari car but has changed his mind...it may be able to go into yours. Also my Spec C engine with twin scroll (also at MMS) would go well in your car too!

__________________
No Subarus currently owned

Ruthless self advertisement will hit them up about the steering rack.

__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR

So after my wedding and honeymoon I am finally starting to get somewhere

__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR

So got the car back on Wednesday but decided to reserve my judgement for a few days, but straight out of the driveway the car was amazing. Dan was happy and surprised with the power / torque delivery and max numbers and he did warn me the car is deceptively faster then the dyno numbers indicate. For those keeps the car lost 11KW from its previous setup, and that is on Maximum's heartbreaker dyno


The car makes full boost much much sooner (3200rpm in 3rd, 3000 in 4th) but more importantly in any gear it's making boost and usable torque from 2000rpm. I don't have to beat on it in low gears to make it move, it gets up to speed in any gear with ease. It's like learning to drive a new car but power figures aside the car drive 200% nicer on and off boost then it did before. I must admit the car doesn't feel as fast without that surge of power but the speedo doesn't lie and it's nice to be able to punch out of corners in second.

The only issue is on hard left turns and under certain WOT conditions the downpipe knocks the steering column which hopefully I can try to sort out on Sunday. If I fail at that it doesn't really matter because Dan was good enough to book me back in on Wednesday to massage the downpipe for a little more clearance.

Apart from the turbo change I also had the external gate and HKS boost controller removed. I am a little torn about the wastegate but I can finally put my foot down in a more stealthy manner (if that is possible ). The boost controller was taking up space on my dash and it looked cool but was just not necessary for my requirements and removing it from the dash make the interior feel much more refined.


Something I had changed before handing the keys to Maximum Motorsport was the rear muffler. The cannon droned while cruising under 3000RPM and with the equal length headers it sounded too raspy in the lower RPM. So headed to Andys Exhaust Werx and $400 later I had a new axle back section and oval muffler. No drone, slightly quieter, deeper note and that Honda raspy sound is gone.


TL;DR - area under the curve is soooo underrated, quieter more refined exhaust systems are underrated and a few niggling issues between me and track time

__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR

So some late night, impulse shopping but my back and wife will thank me for it. The seat as SG9 Forester STI items, matching front and back. Once I stop procrastinating and put them in I will post fap material.


So anyone wanting a set of BRIDE seats (one dark dark blue, one black) and rails keep an eye out for a sales thread.

__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR

Have fun making the STi rear seats fit....

__________________
Doing it for all the wagons out there

Yeah I already knew they were going to put up a fight. I put the fronts in super quickly, no hassle, all lined up nicely. Then turned my attention to the back and see that more then half line up but there will need to be some bracketry fabrication required.

It will take some time, but I am in no rush and am up for the challenge

__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR

Yeah. I know it can be difficult. Im sure you can build something out of a bit of folded sheet pretty easy if you need.

I even know off a few people on Ozfoz who have actually commissioned half cuts from importers, and specifically asked for the metal floor under the seat to be included with the chop. OEM fitment requires extreme measures....

__________________
Doing it for all the wagons out there

I was thinking of doing it to my wagon a few years ago. Then i thought - fuk that. I dont even sit in the back anyways. And now i have no back seat at all because race wagon.

__________________
Doing it for all the wagons out there