Shouldn't rattle on decel as they're under load then too.
Audible when compression braking in third or second?
I've had the clutch disc semi shatter in an rx-7 that was noisey as hell under cruise (bridge ported 13b) where the bridgey lopes along loading and unloading the driveline all the time.....when I pulled it out 3 springs were floating aounrd inside the pressure plate (the retaining tabs holding them in the clutch disk had failed).
they usually clunk a bit when going from decel to cruise at light load when they're fugged (fiction disk and centre hub get rotational free play).
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]
Last edited by Rossco; 16-12-2008 at 12:34 AM.
|