View Single Post
  #2  
Old 10-09-2010, 12:41 AM
Rossco's Avatar
Rossco Rossco is offline
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Apr 2007
Location: Perf, NOR
Posts: 5,467
Blog Entries: 11
Thanks: 54
Thanked 100 Times in 79 Posts
Rossco is a guruRossco is a guru
Send a message via MSN to Rossco
Default

Air temp sensor is only fitted to STI's from the factory.

The Oxygen sensor is not fed power, it generates a voltage of 0-1v approximately for a narrow band (stock) sensor "reading" afr's of 14:1-15.8:1 approximately.

If you car is cold the O2 voltage will be 0.00v for the first minute or 2 (depending on how good your sensor is & how fast it gets up to it's operating temp)

Sensors with black dots are 'switches' i.e powersteering load present, Alternator load, cooling fans, fuel pump,ignition switch, A/con etc.





Read this FAQ:

http://www.paulr33.com/powerfc-faq/powerfc-faq.htm
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

Last edited by Rossco; 10-09-2010 at 12:52 AM.
Reply With Quote