Thread: Rossco's Engine Build
View Single Post
  #6  
Old 26-12-2010, 10:59 AM
Rossco's Avatar
Rossco Rossco is offline
Perth WRX Old Skool Cool Dude
Member
  
Join Date: Apr 2007
Location: Perf, NOR
Posts: 5,467
Blog Entries: 11
Thanks: 54
Thanked 100 Times in 79 Posts
Rossco is a guruRossco is a guru
Send a message via MSN to Rossco
Default
There's been a couple of WTF's!! along the way.......

1. 3 of 4 inlet manifold bolts on the RH side were literally finger tight!!??!!
2. Charcoal canister purge solenoid nipple was broken off (& someone had tried to super glue it back on...lol)
3. Charcoal cannister vapor line from fuel tank fractured along RH chassis rail (underbonnet)
4. Wiring - Cam sensor harness had rubbed through the insulation in one spot due to longterm vibration & insufficient support.
5. Silicone reseal of fail on RH rocker cover gasket.
6. Missing nut on dump pipe (lowest one).
7. RH front inner cv boot split.
8. Mystery red wiring along LH wiring loom.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]
Reply With Quote