Looks like I have a dying coil pack......

It was breaking down a little over the last week at anything over 1.45 bar and now it won't behave above 1.2.........Bugger!

Injectors are in and I've rescaled their sizing in the power fc - mixtures are spot on with them scaled at 79% (so that gives me an approximate flow of 787cc (440+79% = 787))

The coils might be cooked from being over dwelled (over saturated) I had them set up for 30 m/sec of dwell but with the map being reset by someone anonymous at some stage over the last 2 years they might have finally began to die (the PFC runs 240ms dwell for the oem coil pack and I'm running GD coil on plug jobbies).

My Datalogit hasn't arrived from NZ yet but thankfully Mr Fobz is lending me his tomorrow so I might be able to reload my entire map from 2012...... Or at least be able to diagnose the ignition problem a little better.

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]