View Single Post
  #1384  
Old 09-12-2014, 01:59 AM
Rossco's Avatar
Rossco Rossco is offline
Perth WRX Old Skool Cool Dude
Member
 
Join Date: Apr 2007
Location: Perf, NOR
Posts: 5,467
Blog Entries: 11
Thanks: 54
Thanked 100 Times in 79 Posts
Rossco is a guruRossco is a guru
Send a message via MSN to Rossco
Default

Quote:
Originally Posted by s20525xxx View Post
AEM wideband, bosch sensor, placed after turbo, before cat.

So it is knocking killed the engine, right?
Catastrophic detonation is not related to fatigue.....You said "I think fatigue is the reason why most old sti has piston failure" - You are not correct in your assumption......Most of them Die from big end bearing failures.

The STI Bug in question failed due to a leap in Volumetric efficiency that the ECU was never designed to compensate for, which probably lead to severe DET.

Detonation is a pressure spike with enough energy to crack cylinder bores, bend conrods & shatter pistons.

Engine Detonation causes a very high, very sharp pressure spike in the combustion chamber but it is of a very short duration.

The sharp spike in pressure creates a massive force in the combustion chamber. It causes the structure of the engine to ring, or resonate, much as if it were hit by a hammer. Resonance, which is characteristic of combustion detonation, occurs at about 6400 Hertz. So the pinging you hear is actually the structure of the engine reacting to the pressure spikes.

The high impact nature of the spike can cause a clean fracture of the ring land, bend conrods and fractured valves-intake or exhaust.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]
Reply With Quote