According to the service manual, you can do it by only removing some clips from the front lower wheel well, unplug the clip, then remove the entire foglight assembly by undoing the 3 screw bolts on the front.
Only problem is, you'll want to raise the car to make room to move, and the plug harness will likely be seized shut, and the sheet metal bracket it's mounted too is weak and you risk breaking it, I broke one of mine
Mine took a good 15+ minutes each of fiddling and swearing because you gotta push and hold the clip release down to disengage the female and slide out the male side at the same time.
I used a tiny bit of WD-40 to lubricate it though and it comes off easier now.