View Single Post
  #21  
Old 29-12-2014, 11:54 PM
s20525xxx's Avatar
s20525xxx s20525xxx is offline
STI Master
Member
 
Join Date: Sep 2010
Location: Perth
Posts: 728
Thanks: 22
Thanked 41 Times in 41 Posts
s20525xxx knows their stuff
Default

Quote:
Originally Posted by JRecardo View Post
Here's a small comparison for you.

I get ~430nm torque at 3800rpm which as you'll see is the same time as the turbo has kicked in. Then I have a dip and rise again after that, which I am told is something the EJ25s are prone to but I could be wrong.

Looking at your sheet however and you're only making 260nm at the same rev range? Again I'm not the most knowledgeable person here so I've been holding my tongue, but it seems as though every EvoR tune I see comes with disappointingly laggy results.

Don't want to take the wind out of your sails either, I'd be stoked with 360hp, but the response looks like it leaves a lot to be desired.

Dyno sheet attached for reference. Same turbo, pump, and injectors as you. I am on E85 however.

Dyno day?

using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR

Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport

Last edited by s20525xxx; 29-12-2014 at 11:57 PM.
Reply With Quote