Hey guys I dropped my Version 8 motor into my bugeye.
long story short, it's not firing on the left bank #1 and #3
I'll swap the coilpacks around and the spark plugs when i have time sometime this week. Not sure if that will solve it
But i'm suspecting the 207 crank sensor might not be supported in the 205
ecu or some other sensor like the cam angle sensor.
I've checked the wiring diagrams and the cam and crank sensors still go to the same
ecu pins. Does anyone have any info on this sort of issue?
I might swap the crankshaft position sensor over from the old 205 to see if it makes a difference in the meanwhile.