Straight from my STi parts catalogue.

Part# ST28100ZR010

Aluminum, 18 x 7.5J, +55mm, PCD100mm, 5 holes, Gunmetal coated product, with center cap and v ENKEI cast product, compatible with Brembo calipers.

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

not the 17"s?

Yep 17's too apparently.

Part# ST28100ZR210

Aluminum, 17 x 7.5J, +55mm, PCD100mm, 5 holes, Gunmetal coated product,
With center cap and valve, ENKEI cast product, compatible with Brembo calipers.

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

very good and interesting
this are the same 17" sti rims that went on the tuned by sti wrx?

Not a Tuned by WRX But they did come on Last years Club Spec Evo 10 WRX in OZ in 17"s and the last Tuned by Liberty but slightly differ in 18"s.


Also this new Jap Ts one with the CF roof. (18"s)


and the Jap TS Foz: (17"/18")


And the Ts Legacy too: (18")






Sorry for all the pics and massive hi-jack, went a little crazy.

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Not fussed about the hijack mate

These rims look hot. I'd be keen on a charcoal set in 18" depending on the price.

__________________
Respect Mya Authoritaaaaaa!!!

I have the ST2810021030 fitted to my darkblue GC and they suit it perfectly, would look even better on white.

From the email I received today its looking more like $2600 than $2700 for 18" due to good Exchange rates at the moment, these would be delivered to me and have to be picked up or couriered at your request/cost if pick up isn't possible.

Cheers,

Wayno

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Where are you located in regards to collection? What's the usual process when making an order? Now to just convince the wife........

__________________
Respect Mya Authoritaaaaaa!!!

New thread for rims is up here now for all details etc:
http://www.perth-wrx.com/vb/waynes-group-buys/41569-sti-enkei-rims-%242600-less-forum-supporters-various-sizes-pcd-colours.html

Im in the Canningvale area, process goes like this:

1. Choose the rims you want.

2. Post up the part number etc which can be cut n pasted from the thread above with sizes etc and post that in the thread.

3. I'll send off the part number and a current stock availabilty check will be done. (Stock levels change daily)

4. Once it's confirmed they have them in stock i'll contact you with payment instructions/details.

5. I will order and pay for them and my supplier will order them and have them sent to him and then he send them to me.

6. Once rims arrive you will be notified they are ready to be picked up of shipped.

7. Get rims, fit and smile.

The whole process from when you pay will be appx 1-2 weeks dependant on how long it takes for STi to send them to him and the shipping company, sometimes they're pretty slack.

When I got my RA-R rims it took just over 2weeks due to Asian holidays.

Cheers,

Wayno

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO