FAQ: Tuners in Perth
Thought I put together this FAQ on tuners in Perth.
Feel free to add to it [B]Revlimit Motorsport (RMS)[/B] Unit 3/ 38 Cohn St Carlisle 6101 (08) 9470 2444 [I]WRX specialist[/I] - Link - Autronic - UTEC - Motec [B]Maximum Motorsports (MMS)[/B] 66 Westchester Rd Malaga 6090 (08) 9249 7444 [I]WRX specialist[/I] - Link - Autronic - Motec - Unichip - ECUTEK [B]Speedworks[/B] 4 Carbon Ct Osborne Park , WA 6017 (08) 9242-8888 (own 4WD hub dyno) [I]WRX specialist[/I] - Link - Autronic - Motec - Power FC - UTEC - emanage [B]Race Torque[/B] 16 Action Pl Wangara 6065 (08) 9302 6388 - Link - Autronic - Motec - ECUTEK [B]XSPEED[/B] 18 Zeta Crescent, O'Connor 6154 Parts : 08 9331 8088 Garage & Dyno : 08 9337 3288 - Link - Autronic - Motec - Power FC - emanage [B]Hyperdrive Motorsport[/B] Unit 1/ 28 Vale St Malaga 6090 (08) 9209 3100 - Autronic - Power FC [B]West Racing[/B] Unit 5/ 6 O'Malley St Osborne Park 6017 (08) 9446 1913 - Motec - Unichip - Autronic [B]Tony Flood[/B] 9/ 91 -93 Kew St Welshpool 6106 (08) 9472 1800 - Motec - Link [B]Intune Performance[/B] 1/15 Murphy st O Connor 6163 WA 0414 874 824 - Motec - Xcede - Autronic - Link - Haltech - Motec - Power FC [B]All Star Garage[/B] Unit 3, 21 Vale Rd Malaga (08) 9248 7433 [I]WRX specialist[/I] - Link - Autronic - Motec - Power FC - Verso |
[b]Autosport Electronics[/b]
Glen Baker, tuning contractor 0409 203 481 -Motec |
racetorque only does autronic and ecutek that's what lane told me when i was there :)
|
nice one joe :)
|
west racing in Osborne Park (08) 94461913
|
tony flood does motec
|
Mods - can we put this as a sticky?
If not, a bump without the P |
Formaz Performance
O'connor (own dyno) -unichip -apexi Chyper Industries -apexi (more) |
anyone know the rough cost of a full dyno tune with a motec m48?
|
How long is a piece of string?
If you want it done properly, you can spend thousands tuning it...or you can get a basic tune, for around 7-800. |
20 paid hours & countless hours home grown tune time and counting.
|
is that @180$ an hour??!!
mind you I wouldn't be suprised.. |
Just rang Race Torque Andrew said they don't do Motec.
|
Glen Baker does motec. Sean's Shed does motec, Anthony @ Xspeed does Motec, Tim Slakos does Motec
|
[QUOTE=AC Schnitzer]Just rang Race Torque Andrew said they don't do Motec.[/QUOTE]
They get glen baker in asfailk to tune their motec equipped cars |
ah ok.. just confused how come they don't do it. Thanks
|
does AJ still tune @ speedworks? best way to contact him?
|
[QUOTE=AC Schnitzer]ah ok.. just confused how come they don't do it. Thanks[/QUOTE]
because there too busy tuning cars with autronic :p |
[QUOTE=atz 242]does AJ still tune @ speedworks? best way to contact him?[/QUOTE]
Good question - I thought Rob mentioned that he was now working up North & Sean's now doing the tuning. |
Sean is doing the tuning @ Speedworks now.
He is very good from all reports. |
i had shaun do some tune work on my car last week, and -very- impressed with his consistency and ability to spot the danger areas in the map, great understanding of lambda targets and certainly not a 'ghost' tuner like a lot of the clowns out there.
|
well I'm in the market for some tuning.
the new motor has done 9000km since it's first tune when it was still a young'un..500-1000km?? Have since fitted a turbo heat shield and TMIC splitter and I have noticed the throttle response increase on cold mornings and less heat soak all round. Car is running rich I'm sure, comes on good down low but from 6000 up it feels like it's just going through the motions. Getting 350-400kms from a tank, smell fuel regularly, black exhaust... cold start needs some work, hunts sometimes, especially when cold on very light throttle opening... I think theres more power in it and some drivability to come. |
Who would be the best guys to see about fitting and setting up an Apexi AVCR?
Cheers Scott |
Anyone got Sean's contact number for me? Need someone good and willing to come up to Malaysia for a M800 tune.
|
Just ring speedworks and ask to speak to him.
|
who would be best out of mms and west racing to install my unichip and boost modual.
|
do mms do unichip?? i think its psi, formaz or west racing.
go with brett at psi :) |
i didnt think they did but on the first page of this thread it says they do...
Psi... mmmh i heard he can be a bit to eager and not so safe is this true ? west racing never been there but they sound ok from when i spoke with him sorry please someone let me know if i should move this to another thread |
naah brett's fine mate, they don't call him blow up brett for nothing.
|
If you guys had to choose between Glen Baker and Sean@Speedworks, which one will you go with for a M800. From checking the wiring to getting the tune spot on?
Also does anyone have info (work quality etc.) on Warrick from West Racing? |
heard tim slacko at west racing is tops with the uni chip!
|
i got my motec fitted and tuned by westracing would highly recommended them
and NVRENUF westracing for unichip |
yeah spoke with tim slako he seems good.. i have my unichip and boost modual harness every thing ready to go sitting in front of me just gotta get a day off to get it fitted now.cant wait..
he said $500 to fit and tune.. that sound ok ? |
Ok I'll drop Tim an email and see. It'll be good as well since he sold me the M800.
|
does shaun do unichip at all ?
|
Only Unichip dealers can do unichip
|
ok cool west racing it is ~!
|
Speedworks charges A$1000/day for Sean. Is this the norm?
|
[QUOTE=CapKapak]Speedworks charges A$1000/day for Sean. Is this the norm?[/QUOTE]
what does that include ?? |
try this guy:
[url]http://www.perth-wrx.com/vb/showthread.php?t=6020[/url] |
All times are GMT +8. The time now is 03:29 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO