On my way to work my wrx got shat on by a pelican so I hosed it down but did't dry it. My paint and windows now seem to be etched by the mineral deposits in the tap water. I'll be able to polish it out of the paint but the windscreen and windows seem to be etched. Any ideas on how to get the marks off the glass?

polish the windows with the same polish

just dont do it on the windscreen as u might lose your wipers next time you use them

__________________
I used to tune cars with screwdrivers.
Clutch, Brake, Accelerate.

ok i have done this but be very very carefull

use bam the bathroom cleaner

but do not spray it anywhere near you paint, spray it on a scourer sponge have a bucket or 2 of fresh water handy for a quick rinse, take your scourer and scrub the glass with the bam on it, then quickly rinse it off with the fresh water and finally give it a good hosing to clear any residue away.

It is absolutely you get it all off asap as it is acidic and will root your paint if you are not carefull, it's not a strong acid but it'd be enough to cause problems. but it will get any mineralised staining off glass 100% even bore water stains!

good luck

a clay bar should work

water spot remover, made by malco, not sure who'd have it, but thats the product. We sold it where i workd in broome cos they have silica in the water up their that u have to literally ise a razor blade to carve off... water sopt remover, if u can find it is the shit

Try a good clay bar. Should get it out no problems

Thanks heaps for all the great advice people