One for the Autronics guns.

What does one flash mean.. I know two means all is sweet, but for the past few weeks I've only been getting one.

----------------------------------------------------
Error code format:-
*Error codes are all 2 digits, each digit comprising a number of 1/2 second on, 1/2 second off flashes.
*The 2 digits of each code are separated be 2.5 seconds.
*Error codes are separated by 5 second pause.


ERROR WARNING / DIAGNOSTIC LIGHT - FAULT CODES.
11 NO ERROR
13 THROTTLE I/P
14 02 I/P
21 AIR INTAKE TEMPERATURE I/P
22 COOLANT TEMPERATURE I/P.
23 BAROMETRIC PRESSURE.
25 VEHICLE (WHEEL)SPEED I/P.
26 OVER BOOST ERROR.
31 PRESSURE I/P.
33 CYLINDER PULSE I/P MISSING.
34 "SYNC" REFERENCE PULSEI/P MISSING.
41 EBP I/P.
43 "SYNC" ERROR DETECTED WHILEENGINE RUNNING.
53 SUPPLY OVER VOLTAGE ERROR.
73 POWER FAIL DETECTOR ERRORCONTACT SUPPLIER.
82 CMOS RAM MEMORY LOSS.
99 EEROM ERROR.CONTACT SUPPLIER.

__________________
Ho's gotta eat too

Hey chris did you hit boost cut when the eng was warming up ? on mine if the coolant temp is not at a set temp you cant give it full accel which comes up with a flash even after the key is cycled it would flash once took a couple days and it stopped . maybe give steve at mms or aj a ring they should know whats going on if its been there for a few weeks . if i was down you could of used my laptop and cable to check it.

Hey Chris gimme a call when you got the car at work next and we can plug the lappy in and check.

Sometimes you need to modify yor setpoints for your alarm triggers as you might be slightly out of normal operating conditions - nor not....

j