|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Car wont start
Please help.
Today after pulling out an injector and replacing car will not start. I have turned the key to acc and entered the pin, can then hear the fuel pump, then turn the key to start and nothing. Have now pulled the battery out and charged but still nothing. Any ideas? Do I need master code? |
#2
|
||||
|
||||
yesssss
__________________
deadly treadly |
#3
|
||||
|
||||
Would somebody be kind enough to pm it?
Would be appreciated |
#5
|
||||
|
||||
I thought you blew your engine or something? If so you had that fixed really fast!
Yes you will need to speak to a dealer. I heard Subaru Ossie park will usually give you the code over the phone. |
#6
|
||||
|
||||
we need a pinned subject....
do not disconnect batteries in cars with shitty brants for entended periods of time, theres only so long the battery in teh keypad can hold the code after the main power goes..............
__________________
Wand basics: One must brake with the left hand and steer with the right foot. Having Defi's does not make Racecar.. |
#7
|
||||
|
||||
or know your mastercode
__________________
deadly treadly |
#8
|
||||
|
||||
No Dan just the Turbo of which is still on the way.
Was just seeing how hard it was to remove the old injectors, then replaced once found out it was easy. What a silly mistake, should have left the things alone. Boredom. |
#9
|
||||
|
||||
Problem fixed.
Works out that it had nothing to do with the brant alarm, although I did have the battery out of the car for a couple of hours. When I removed the injector I lost all pressure to the fuel line hence it would not start again. After the pressure was built up again no problems. |
Tags |
car, start |
|
|