Just washed the beast and noticed that there is what I think it a layer of fiberglass matting starting to work its way out from under the rear wing.

Is about 3 in. in from each side about 1 1/2 in. long between bottom part of wing and the boot. About 2 mm sticking out.

If I was to unbolt the wing and reposition or remove it would I likely run into problems latter.

Would Subaru fix it under warranty????

__________________
Stoner & Webber 2011 World Champions

I thought the original wings were made of ABS plastics or something like that. not fibreglass.

__________________
RS Liberty - Because WRX's are only good for parts...

I think it is a layer of padding between the wing and boot. I think it is fiberglass but hard to tell cos was wet when I found it. Probably a layer of felt but that is why I am asking.

__________________
Stoner & Webber 2011 World Champions

Never had that problem with my wing but imagine it is just felt between the wing and boot. Suggest you just loosen bolts and reposition yourself.

__________________
Funny looking German Subaru

or take it back to subaru and go "oi you, fix this"

__________________
MY93 Impreza GX 1.8L, 0hp, 0nm

did you use a high pressure hose?

__________________
MY09 Evo X - 1.6bar@3500rpm - got lag?
Barbagallo - 56.03 (S); 1:08.09 (L)
Collie - 50.77
Possibly the most under-driven Evo X in the world??

No Try not to waste to much water!!!!!!!

__________________
Stoner & Webber 2011 World Champions

High pressure cleaners actually use LESS water than ordinary hoses

Yah I had same thing .. black kinda cloth like material poking a little bit.. just trim it carefully with a razor blade and rip it out of there.

__________________
[url]http://img514.imageshack.us/img514/6284/evobeatsstiug6.gif[/url]

Yea that is what my mate suggested but can just see the back of the boot or me wearing a dirty great gouge mark.

__________________
Stoner & Webber 2011 World Champions