|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
help!!
i have bought a hks ssqv off of a 04 wrx that has come with the tmic flange. i need to take the flange off as im putting the bov on a fmic. how do i take it off? it has a clip on the base in the flange but it is really stubborn. anyone out there have a solution????
__________________
electrical work needed? 0438954622 |
#2
|
||||
|
||||
you need one hell of a good pair of circlip pliers to get in there and remove that sucker. I broke my cheap pair putting together my HKS BOV ages ago. Had to visit my local mechanic and ask to borrow their pliers
__________________
RS Liberty - Because WRX's are only good for parts... |
#3
|
||||
|
||||
Thats the tool..
__________________
[SIGPIC][/SIGPIC]11.617 120mph |
#4
|
|||
|
|||
i was afraid i was going to need to use cir clip pliers. there is only the smallest gap to get in there.... do i need to buy a flange to go on to the fmic or can i weld it straight on?
__________________
electrical work needed? 0438954622 |
#5
|
||||
|
||||
if the FMIC pipes are alloy, yes you can get it welded on. But you are still going to need to remove the adapter off the BOV to weld it as there is a rubber O-ring seal in there. If you weld with the BOV still connected you will probably melt the rubber O-ring with the heat from the welding and you probably won't have a good seal after that to hold in the pressure under boost.
__________________
RS Liberty - Because WRX's are only good for parts... |
|
|