looking for the cluster pinouts for an australian delivered gf8 (gc8 hatch)
1997 wrx.
(2x white long plugs plus 1 small plug)

also the pinouts for a JDM VER4 STI cluster.
(Three green plugs)

any links or help would be appreciated

Attached Thumbnails

       

Might help?? You could ask MMS if they know if old Ken the auto sparky they used in the past is in town, he re pinned my 98 Lib into a 97 STI cluster, he did it at home in one night after we did most of the wiring on my conversion.

Impreza Manuals | ken-gilbert.com

NorthUrsalia.com: Wiring Diagrams And ECU Pinouts

Diplodocs - Upload your user manual

__________________
Beaten up old 98 Gen 2 Liberty, 13.0, stock V3 STI running gear.
07 Transit motor home
69 VF & 70 VG Valiants needing full restoration
Yamaha Zooma 50cc rocket hopefully going with the Transit.

FYI the cluster with the green plugs id V5/6. V4 looks the same but has different plugs on the back.

okies so the sti dash is from a ????? (year model etc)
because i must be looking at different year wire diagram as the wire colours are not the same. (or do the colours not matter) on that one.

99-00 GC8f/G Japanese STI or RA - pinout is identical to AUS 99-00 WRX

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

anyone happen to have a list they have written down? <for this dash.>
for all three plugs with wire colours and functions?

ie like plug a i10
1 g/w (function) [example temp earth]
2 p/g (function)
3 br/w (function)
4 empty
5 empty
6 gr/y
7 empty
8 empty
9 empty
10 empty

if not ill post what i come up with after i wire it in tommorrow.
assuming it works.

Theres a site with the full diy written out. Just having a look for it

Cant find it,
Ask Kato if you can borrow my old harness and copy it?

ive worked out what is what on both now....

and its time to actually wire this puppy in.
i have two wire looms for the sti dash so i should be ok.
(my car it cant be removed)
i hope all the signals are the same. (speed tach heat fuel etc)
i will post some pictures and a diy if it fires up ok to help anyone else who wants to do this.

then just for the cutting fitting in the dash itself......
will post pictures and give pinouts to anyone else who is interested.

i have never been able to find a diy to put it in an older beast like mine.

just cant find the wire for the seatbelt warning from the car now.
to turn that off on the new dash does it go to earth or power?