heyy guys a couple months ago i went to maximum motorsport to install my vf39 turbo, i also had my stock 2004 top mount. they had bolted everyting on but only 1 thing stoping them was the y pipe from my top mount was to short and was no other way to go. maximum motor sport then reinstalled my stock turbo and i was charged 300 bucks for having my car the way it was. ofcourse a lot of people wudnt be happy giving 300 bucks like that but things happen. i had now purchased a bigger top mount and got the hyperflow y pipe on my car and was wondering if any1 cud help me install my vf39 will payy them 100 buck or 2 cartons of watever they like. i just realli want this in atm being messed around a couple of times and yea i know theres quite a few of u guys on perth wrx that can i just really need your help.

Who are you getting to tune it?

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

have you got access to a hoist?

__________________
2000 WRX - Grip King
1997 Sileighty - Gate Monster

you dont need a hoist to change out the turbo - its easier but not essential

the bolts on the dump to turbo should be relatively "looser" now that they were removed before, so that won't take as long

you may need new brackets to install the new bigger tmic though, as the stock brackets may not fit

makes it a lot easier to get the exhaust off

__________________
2000 WRX - Grip King
1997 Sileighty - Gate Monster

Yea I do need brackets but for now its holding on pretty tight hay but for I just need some1 to help me install the turbo I am willing to payy for a hand

Ffs.... It's "pay" not "payy".

Turbo change & no tune? Goodluck.

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

its getting a tune straight away

Why not that let the chosen tuner install the turbo?
Least you know it will be done properly and wont go bang when driving the car there.

__________________
Chinese Mexican
[SIGPIC][/SIGPIC]

^^ Agree, just let the workshop do it! Then you know it will be done properly and you have some sort of warranty! Why let some douche you don't even know work on your car? Even though i know most of us on here are more than capable of doing this for you but seriously i don't know anyone that could be fu*k doing it for 100 bucks!

eHH my 2 cents!