|
|
LinkBack | Thread Tools | Display Modes |
#21
|
||||
|
||||
^Someone with sigma try and let us know if it makes chirping happiness
__________________
06 STi: 337hp @23psi on E85... 06 STi: 309hp @22psi on 98ron... |
#22
|
||||
|
||||
Doesnt work on mine. Those codes r for sigma m30, 08+ use s32.
using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport |
#23
|
||||
|
||||
I would assume if there is a way to chirps on sigma s30 there should hopefully be a way on the s32
08+ owners need to search some more.
__________________
06 STi: 337hp @23psi on E85... 06 STi: 309hp @22psi on 98ron... Last edited by RJ999; 10-04-2014 at 02:33 PM. |
#24
|
||||
|
||||
Tadaaaaa... Found it ...Subaru codes for S32 Sigma:
Auto arm with door locking 60 seconds after the last door has been closed, Note make sure keys arnt in the vehicle. *17856 wait for the beep *004*1# turns it on. everytime a door is opened it will beep twice to inform you that its active door unlock/locking beeps *17856 wait for the beep *000*1# turns the beep on when locking and unlocking although admittedly not very loud Read- Sigma S32 Codes - ScoobyNet /End thread ^try and let us know... that one has to work ffs lol
__________________
06 STi: 337hp @23psi on E85... 06 STi: 309hp @22psi on 98ron... Last edited by RJ999; 10-04-2014 at 02:40 PM. |
#25
|
||||
|
||||
It works! Thanks!
Note: Unlike m30, dont insert key when type codes. using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport |
#26
|
||||
|
||||
*17856 *008 * 0 or * 1 then #
Accessory Wire 3 (Total Closure) Operation - on Arm *0 = “Timed”. A passive, timed negative output is provided on Acc. Wire 3, every time the system is armed, to operate Total Closure (Total Closure Time *121 must be adjusted from 0 to select the output period if required). When held on arming, TX button 1 still operates Panic. *1 = “Hold Down”. A negative output is provided on Acc. Wire 3 only whilst TX button 1 remains held on arming after 3 seconds, up to a maximum of 26seconds (Total Close Time *121 will not affect the output time) When *1 selected, panic can only be operated from optional 2 button TX NB: Only S30 & 34 models. * 0 (“Timed” & Panic) *17856 *009 * 0 or * 1 then # Extend Standard CDL Lock Pulse - On/Off (only when TX button 1 held) Can be used with the above or as an alternative total closure option, where the vehicle already has a total closure circuit that can be operated from the standard CDL lock connections. When switched on, the Std CDL Lock pulse is extended (second pulse in the case of double pulse settings) as long as the TX button remains pressed, up to a maximum of 26seconds. When *1 selected, panic can only be operated from optional 2 button TX * 0 (off) *17856 *010 * 0 or * 1 then # Arm/Disarm Indicator Flash - On/Off For both radio key and direct switched systems * 1 (on) *17856 *011 * 0 or * 1 then # Accessory Wire 8 Function - *0 = Internal Panic Circuit. Configures system to activate Panic Mode whilst an earth input is detected on this wire. *1 = Closed Loop Protection. Configures system to trigger when the circuit becomes open when armed. NB: Only S1, 4, 30, 32 & 34 models * 0 (Internal Panic) *17856 *012 * 0 or * 1 then # Positive Door Switch Input or Internal Panic Circuit *0 = Internal Panic Circuit. Configures system to activate Panic Mode whilst a 12v input is detected on this wire. *1 = Positive Door Switch. Configures system to trigger when the circuit becomes 12v when armed. NB: Only S12, 30, 32 & 34 models * 1( “+” Switch) *17856 *013 * 0 or * 1 then # Key Theft Protection - On/Off NB: Only S4, 30, 32 & 34 models * 0 (off) *17856 *014 * 0 or * 1 then # Accessory Wire 6 (Headlamp Illumination) Operation - *0 = Arm Only. Configures the timed output to occur only when the system is “actively” Armed (illumination does not occur when Auto-Arming or Auto- Rearming). *1 = Arm & Disarm. Configures the timed output to occur when the system is both “actively” Armed & Disarmed (illumination does not occur when Auto-Arming or Auto-Rearming). NB: Only S30, 32 & 34 models * 0 (Arm Only) *17856 *015 * 0 or * 1 then # Accessory Wire 1 Function - *0 = Alarm Armed Output. Negative output provided whilst the security system remains armed. *1 = Total Closure Output. Negative output on arming, this can be “timed” or on “hold down” adjustable using *008 and *121. Wire 1 then behaves and can be adjusted as Wire 3 would be if fitted. NB: Only S4 models *0 (Armed Output) *17856 *016 * 0 or * 1 then # Accessory Wire 2 Function - *0 = Aux Siren/Pager Output. Negative output provided whilst the security system is triggering. *1 = Total Open/Boot Release Output. Negative output on disarming, this can be “timed” or on “hold down” adjustable using *006 and *122. . Wire 2 then behaves and can be adjusted as Wire 4 would be if fitted. NB: Only S4 models
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport |
#27
|
||||
|
||||
Brilliant RJ999, it worked Thank you, now I just want to make it so that all doors will open with one press of the button, instead of pressing it a twice
Last edited by Smeg; 10-04-2014 at 04:42 PM. |
#28
|
||||
|
||||
HAHA Awesome... happy to have been able to help
Public service made to all 2008 to 2014 owners, cost saved by not having dealer charge 100buks for every door/alarm function change. Mods - I think this might be a good Sticky and thread renamed to "2008-2014 SIGMA Alarm Function codes"?
__________________
06 STi: 337hp @23psi on E85... 06 STi: 309hp @22psi on 98ron... Last edited by RJ999; 10-04-2014 at 05:16 PM. |
#29
|
||||
|
||||
Just tested *17856*005*0# is to turn off auto rearm.
using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport Last edited by s20525xxx; 10-04-2014 at 06:14 PM. |
#30
|
||||
|
||||
Can a mod sticky this for future reference?
__________________
2015 Forester XT Premium 2020 VW Tiguan Allspace teejay: If I wanted a comeback Id wank in front of a fan |
Tags |
2014, issues, technical, wrx |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
match this chasis number! | V5 STi R | General Subaru Discussion | 19 | 27-10-2014 02:13 PM |
Report: Subaru WRX and STI meet at the dyno with interesting results | rss.feed | General Subaru Discussion | 0 | 27-02-2014 11:50 AM |
Official: 2014 Subaru WRX and STI pricing announced | rss.feed | General Subaru Discussion | 0 | 08-08-2013 10:40 AM |
Heap of WRX engine parts CHEEEEEEAP | marcaant | For Sale | 4 | 10-11-2008 09:19 AM |