Perth-WRX.com

Perth-WRX.com (http://www.perth-wrx.com/vb/cmps_index.php)
-   Mechanicals (http://www.perth-wrx.com/vb/mechanicals/)
-   -   Engine build finally underway (http://www.perth-wrx.com/vb/mechanicals/65040-engine-build-finally-underway.html)

VUSSUTE 15-05-2016 05:41 PM

[QUOTE=Wildbill;838265]if your after front mount intercoolers I have 2, bar and plate, the other a tube an fin, and a set of ID 1300cc near new, they where to small for my use.[/QUOTE]
Mate. Im definitly interested in the injectors. Could you PM me how much you want for them and your contact details.
Im in adelaide atm but will be back next week.

How much use have they had

GTLeggy 15-05-2016 08:19 PM

Power required to go from 12.5-11.9 ~ 50hp
Power required to go from 11.9-11.5 ~ 80hp
Power required to go from 11.5-10.9 ~ 150hp

See where i'm going..

Rslib72 15-05-2016 08:32 PM

Well say it's in the elevens once you get to run her down the strip that is still one hell of a fast car the vast majority of cars on the road are not that fast....

VUSSUTE 15-05-2016 08:42 PM

Hrmmmm... looking at maybe the ATP Gt3076.. its stock location.
Anyone had any experience with these turbos

Bram 15-05-2016 08:45 PM

[QUOTE=VUSSUTE;838298]Hrmmmm... looking at maybe the ATP Gt3076.. its stock location.
Anyone had any experience with these turbos[/QUOTE]

Could also look at a blouch dom 3. Its a stock location gt3076r but it has a billet wheel (kinda like a gtX3076

Bram 15-05-2016 08:49 PM

But i dont think either will get you into the 10s

dazdavies 15-05-2016 09:08 PM

You're not getting in the 10s with anything less than 450WHP plain and simple.

I've just looked at graphs for the power my 2 door GC8 Type R was running when I did my 10.9

This was on a concrete runway so there was plenty of grip and the car weighed 1231Kg

This was on a Front Mounted GTX35R running 1.8 bar and a 98/20%Methanol mix.

[img]http://www.scoob.co.uk/typer/dyno/dyno1.jpg[/img]
[img]http://www.scoob.co.uk/typer/dragruns/10secquartermile.jpg[/img]

[url]https://youtu.be/-WrfaZF0UlQ[/url]

VUSSUTE 15-05-2016 11:32 PM

Mate.. i think i may not be making myself clear enough. I am ot necessarily chasing tens... jhst want to get as close to it as possible with the gear im choosing

If i ran 11.48 @ 120mph i would be more than happy.
My biggest issue is wanting to retain a tmic and stanard mm mount turbo

Hurtenstein 16-05-2016 09:44 AM

[QUOTE=Bram;838299]Could also look at a blouch dom 3. Its a stock location gt3076r but it has a billet wheel (kinda like a gtX3076[/QUOTE]

Ive got a Dom3.
I cant seem to get more than 320WHP out of it on 98.

Bram 16-05-2016 09:49 AM

[QUOTE=Hurtenstein;838312]Ive got a Dom3.
I cant seem to get more than 320WHP out of it on 98.[/QUOTE]

Thats pretty gay. I get more from my dom 2.5. Must be something lacking with your setup for sure. Should be able to get 350 - 400whp easy enough with correct support mods on a dom3


All times are GMT +8. The time now is 06:26 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO