Bug eye wrx 01 3" TBE

Ok my car needs a service i got all the bits from my work all the right parts and when i go to put the plugs in HAH the ej20g ? Has coil packs on the heads which also seems impossible to change the plugs unless you dropped the engine or ripped half the powersteering etc etc off Any explainations on what the process of changing plugs is ?

My clutch has started slipping....Ive scourced a kit for $250 just need it installed what pricing am i looking at and does anyone have a number of a workshop who i can call (Good name)

And lastly just installed a boost guage, 3" TBE is the only mod and the resinator box removed from guard what boost would i be running stock ? Its spikes to about 13psi on cold days Sorta new to the whole turbo thing

Hey yeah to put them in is a mission but possible ...Your clutch Pm sent...And boost it sounds about right .14 psi should be it nt sure..

my bugeye runs 13.5psi stock.

Need to remove the airbox and washer water bottles to get to the plugs. First unplug the electronic cap taking note of what colour is where (white is front usually I think).

Then take out the bolt holding the plug ends in and remove. Then use a 5/8 long spark plug socket with small extension to undo the plugs.

do everything in reverse to put back.

not sure about the clutch kit though...

Cheers heaps aye...

With the plugs theres are a heap of things above them like power steering and stuff aye looks like a mission, will have a look first thing tomorrow.

i have got a brand new heavy Duty clutch for sale if you r interested

__________________
699HP

Nah im still a tad rough for h/duty

Stock boost for an MY01 should be around 14.57ish.

Remember gauges are inaccurate.. either measure the voltage or use datalogs to confirm it.