Ok heres my situation, i am making a i/c waterspray for my GC8 (my00),

i have decided to use a sepated pump and bottle as the window washer bottle is of pathetic size which will be located in the boot.

My dilemma is that all the DIY's around on forums use different things to what i plan on using. For example the use of a pressure switch, where i will simply be using an on off switch.

This is my equiptment and materials thus far:
* i have a 10L bottle (Bunnings)
* Washer Pump from a Holden (wreckers)
* Illuminated Switch (Repco) on switch it has 3 terminals (+), ground and ACC for the illumination of the switch i guess.
*10 meters of 4mm tube
* I also have electrical wire in two colours and electrical teminals for the switch and also for the battery and ground.

My problem is that i have no idea about the electrical install, i does not sound complicated from the DIY's i have read which use different systems.

is there any thing else i would need to make the installation successful.

If any electrical guru out there could give an insight as to the electrical process. It would be very appreciated.

thanks



john.....

__________________
MY04 WRX CLUBSPEC 7