|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Where can I get this? 3M product.
Im starting to get oxidation on the carbon wing, been reading good reports about this 3M product - gets rid of it and comes out like new.
Where can I get this - 3M™ Marine Restorer and Wax, 09005, 3M Id : 60-9801-0693-8 GTIN(UPC/EAN) : 0 00 51131 09005 7 The 3M Aus website does not list it. |
#2
|
||||
|
||||
Its most likely not sold in Australia, Try the US eBay site.
__________________
Range Rover Evoque Si4 Dynamic |
#3
|
||||
|
||||
yeah looking that way :S
cheers will hit the US |
#4
|
|||
|
|||
Call 3M and ask who their stockists are? Call around the boat shops? You MIGHT find it at an aircraft maintenance business to.
|
#5
|
||||
|
||||
Call International Paints in Henderson. They supply coatings for Carbon Fibre masts etc for Yachts.
__________________
RS RA The more people I meet the more I like my Dog! 12.463 1/4 mile, not bad for an old school Liberty [DECEASED] MY08 Liberty Tuned by STi |
#6
|
||||
|
||||
I work at 3m i will ask, back at work Tuesday
|
#7
|
||||
|
||||
cool thanks
|
#8
|
||||
|
||||
Available from a good chandlery like Witworths (Subi or claremont) or bargain boat bits Nedlands.
BCF is worth a go too. I restored/rebuilt a Turboglass bass boat I imported from South Africa and used that exact product during the restoration of the hull. I'll have a dig around the shed for it..... Just be aware that it has a pretty harsh cutting agent......Specificly for Polyester Gel coats (very hard material). The epoxy used with carbon is much softer so there's a danger of scoring or tearing the finish. 3m finese super fine is probably the better option, I'd be speaking to a reputable panel shop like Mirage Spraypainters first. The other option is to have someone wet sand it and hit it with a 2 pack clear.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#9
|
||||
|
||||
thanks mate i'l hit em up and see what they recommend.
The oxidation isnt too bad, but noticeable on the edges where wing bends down. |
Tags |
3m, product |
|
|