Item Description: Kelford R199-A Camshafts. Suit EJ255/257 Single AVCS turbo motors.

256&252/260 Degrees advertised duration.
9.55mm&9.55mm/9.50mm lift.

These cams are very strong in the mid range. But dont have the lift or duration for high rpm power. Would suit an engine with small/mid sized turbo trying to optomise torque through the mid range. Or maybe an economy freshen up where OEM cams would have other wise been used. Would not recommend for an engine with very large turbo or wanting big high RPM power numbers. These cams were used in an engine with over 400whp and 1000nm total torque.

Removed from engine after big end bearing failure. Minor scoring on a couple of the journal faces as seen in the photos. Although this should not cause issues as it is very minor. I am selling as i will be fitting larger cam shafts to suit my requirements. Not because of the scoring. I would be comfortable to use these again if i was doing a street car. But they just arent big enough for what i want out my new engine.

Feel free to inspect or ask any questions.


Condition: Used.
Age/Mileage: 5yrs / 25-30k km
Price: $ 500 / offers.
Pictures: Below.

Contact: Bram
Email: PM please.
Phone number: PM Please.
Location: Spearwood Perth WA

Kelford r199-a by bram biesiekierski, on Flickr

Kelgord r1999-a by bram biesiekierski, on Flickr

Kelford r199-a by bram biesiekierski, on Flickr

R199-a by bram biesiekierski, on Flickr

R199-a by bram biesiekierski, on Flickr

Kelford r199-a by bram biesiekierski, on Flickr

R199-a by bram biesiekierski, on Flickr

__________________
Doing it for all the wagons out there