Its a 2005 GDA and im using torque pro on android

ok
so I brought what I thought was a Bluetooth OBD2 scantool of ebay for my 2005 wrx and I have the torque pro android app but it does not read my ECU ,but if I plug it into my Dads Toyota Camry which is OBD1 it reads straight away.
does this mean that my scan tool is only compatible with OBD1 compliant vehicles
I have since been given a credit from the store as I told them I did not work

weird. i've used the cheap ebay obd2 bluetooth readers + torque app on both my STi's (02 and 06) and it worked fine.

Is it a case that the one i got is a little faulty or is it a obd1 reader
Do i buy another and see if thats works

using the Perth-WRX mobile app

Welcome to test mine,where you located?

Quinns rocks but work in welshpool

using the Perth-WRX mobile app

Does any one know where I can find the emmisions control information sticker on a 2005 WRX and what stickers or information should be on the standard or STI ecu under the passenger side carpet

using the Perth-WRX mobile app

Will these bluetooth obd2 port readers work on a 1998 wrx impreza with stock ecu?

Short answer is no. Ive got a bit more complicated tool and that gives me the sane result on my 99 as my bluetooth one. Nothing. The port is there but Ive been told they didn't work untill the bugeye.

using the Perth-WRX mobile app

[QUOTE=Wildslide;829484]Short answer is no. Ive got a bit more complicated tool and that gives me the sane result on my 99 as my bluetooth one. Nothing. The port is there but Ive been told they didn't work untill the bugeye.

using the Perth-WRX mobile app[/QUOTE]

Cool what's that tool u got to read engine information? Is it same concept as bluetooth to a android phone app? Where did u get it from? Is it easy to install?