Hi

I'm looking for either of these turbos in good working order

VF22 or VF30

Thanks

I have a 34 if you get desperate - working well, believe about 60k on it if the last engine swap km's are accurate(ish)

I'd take a VF 34 over a 30 anyway!

http://www.perth-wrx.com/vb/mechanic...specs-faq.html

Wouldn't be too many VF22's floating around I wouldn't think.


VF30

The VF30 is commonly considered the best bang for the buck turbo in the IHI VF series line. A relatively new model the VF30 features the same exhaust housing as the VF24 but a larger compressor side similar to the VF22. The combination of these two parts results in increased output potential without the lag associated with the VF22. Although it doesn't offer the top end supremacy of the VF22, the VF30 is a great compromise between these unit and the quicker spooling models.

VF34

The VF34 is nearly identical to the VF30, with the same exhaust housing and compressor. However the VF34 goes back to the ball bearing design, and in doing so achieves full boost approximately 500RPM sooner than the comparable VF30. The VF34 is the most recent IHI design and as such costs slightly more than its counterpart. Top end performance and maximum output are identical to the 30.

__________________
[COLOR="Red"][B]Need Finance for a new Car or Mortgage??? Call or email me today:[/b][/COLOR]
[b][color="BLUE"][url]http://www.themortgagegallery.com.au/find-a-broker/manager/sam-zurzolo.aspx[/url][/b][/COLOR]

Get vf34 with the p20 housing = lag like the 22 and pulls like the vf22

__________________
race tape y pipe running .05 bar till spares turn up.

Thanks for all the help and info guys

I managed to pick up a VF22 for very cheap

loved the old 22 on my foz

lag lag lag......boooooooooost... limiter, repeat

That's what I'm hoping for!!

STI pink injectors with Walbro GSS342 and E85 be ok?

Go bigger injectors for E85. What ECU?

__________________
Huge range of extinguisher brackets for cars!

http://kap.industries/

How big you reckon?

Not sure on ECU yet, was thinking ECUTEK?

What are the ECU options for MY01 Bug Eye?

Would love a PFC, don't think I've ever seen one?

There is no PFC for your bug eye, the last Subaru ecu they did was for 99-00 version 5/6 Sti/Wrx.

Your options are:
1. Verso Tune (Flashed onto your factory ecu) - All Star Garage
2. Ecutek (Flashed onto your factory ecu)- Maximum Motorsport
3. Vi-pec replacement ecu - All Star, Evolution R etc
4. Link
5. Autronic
6. Motec

I had Power Fc's for the last 5 years, I now have a Vi-pec and wouldn't go back.

Vi-pec has Anti-lag, launch control, MAP sensor based etc, etc.....

You'll be needing at least 750cc injectors to run E85 & still have headroom for future mods.

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]