The Vi-pec is in........
Gm 3 bar MAP is in.....
IAT sensor is in........
Wideband Oxy wired up.....



She lives!



After finishing my Vi-pec instal plus a little work on Performance West's V8 supercars in prep for Saturday's Night Masters @ Barbs - It was midnight haha........

The only tuning so far has been the Idle, cruise & to a max of 6 psi using the ECU'S 'Quicktune' feature..........Love it so far

The drivability is mint, the idle is smooth as silk & the AFR's are spot on with the targets I've set.

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

Good work mate, did you win lotto by the way

__________________
Version 6 Sti
6 Speed, brembos, twin scroll and 2.1 stroker
356hp and 471nm ATW

No Lotto buddy - plenty of long hours though...........

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

Looking forward the finishing product

using the Perth-WRX mobile app

__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR

Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport

Another day..........Another purchase.........



2 Spot rear caliper adapters so I can fit the 2 spot rears & vented discs Munya graciously gave me

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

It's Rossco, Will never be fully finished! (Constant Change)

__________________
2018 Nationally Accredited Silver CAMS Photographer

Having a modern day PC without an SSD is like hiring a hooker for hugs.......

^^ Never a truer word written! :P

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

Speaking if changes e85 updates??

using the Perth-WRX mobile app

What wideband sensor are you using?
Also can you show me the pin outs for it?

Cheers

Hey Buddy I use a Techedge 2j1 controller with a Bosch LSU 4.2 sensor

all the info is here:

Wideband WBo2 2J1 Technical Information (Tech Edge)

They're replaced it with their 2J2 but technicly they are the same, they've just changed how the harnesses connect to the controller

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]