|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Question about LC on Ecutek
Found out last night my car LC enabled (didnt know it was turned on)
anyway, its set at 5500 which makes launching impossible who else has LC enabled? I was thinking about setting it at 7500 (where i usually launch at) or should i turn it off? what are its real benefits regarding to boost/revs ? would i need a complete retune or is it just a parameter enable/disable ? |
#2
|
||||
|
||||
Dont bother with launch control imo, just slowed the rex down, whether it was set at 4k or 6k, didnt work
But people like Jan will tell you a very different story
__________________
PerthWRX - Where gay singles meet! |
#3
|
||||
|
||||
but if it can hod boost at 7500 rpm then thats a good thing right? it deactivates after it senses your moving.
to be able to hold ur foot the floor and know it wont go over 7500 seems very lucrative |
#4
|
||||
|
||||
tode, how would i be able to tell if my tek has LC enabled?
__________________
Julian 05 STi |
#5
|
||||
|
||||
Quote:
Mine (Verso, not Ecutek) is set at 6000rpm (building 0.6bar I think) and works a treat, 1.81 60ft times on a heavy GD with big 18" wheels/tyres is pretty good IMO.
__________________
https://www.facebook.com/JanGlovacPhotography MY05 STI track car | VF Clubsport |
#6
|
||||
|
||||
Clutch in - throttle 100% - the revs stop and bounce @ the set rpm limit (say 5500)
__________________
MY09 Evo X - 1.6bar@3500rpm - got lag? Barbagallo - 56.03 (S); 1:08.09 (L) Collie - 50.77 Possibly the most under-driven Evo X in the world?? |
#7
|
||||
|
||||
Quote:
Mine's set @ 5500 after trying various rev ranges between 3500-5500. If you data log it, you can see the graphs and which works best in terms of rev drop, boost rate, etc.
__________________
MY09 Evo X - 1.6bar@3500rpm - got lag? Barbagallo - 56.03 (S); 1:08.09 (L) Collie - 50.77 Possibly the most under-driven Evo X in the world?? Last edited by BLUES; 22-03-2007 at 01:06 PM. |
#8
|
||||
|
||||
Disable it Tode!!!
Better off without it, I constantly am around the 1.8 60ft's with my best being 1.75. Learn how to launch it. Launch control is CHEATING!
__________________
[COLOR="Red"]I have the right foot of Subaru death![/COLOR] [SIGPIC][/SIGPIC] 365hp and 515nm New Beast to arrive April 2015 - 365hp, 450nm, 0-100 in 4.4sec. AMG Goodness! |
#9
|
||||
|
||||
i know how to launch it without it, but since somehow it got enabled - i wouldnt mind making the most of it.
seems pretty good u dont have to watch ur rev tacho and foot when u know it will sit at 7500 and wont go over but can u genearte more bost without it or is it the same? LC at 5500.. i dunno how u can do that hahaha |
#10
|
||||
|
||||
Tode i had LC setup on the tek3 (the ecu u have now) that is why u have that option in ur car. I turned it off as it was set high enough and there couldnt make enough boost off the line.
I rekon if u set it higher then it may be easier to get off the line without bogging down, however if u set it too high then u may get too much wheelspin.. |
Tags |
ecutek, lc, question |
|
|