Genuine Philips, Denso Hids, Canbus Hid systems, Polarg Led Park+Interior Lights+DRLs
 

Hi Guys,

I have Philips Hids and Denso Hids in Stock. Also have the latest LED and Canbus protocol compatible park lights.
By the way, I will fit the Hids myself FOC on your cars for all p.wrx members.

[IMG]http://img204.imageshack.us/img204/9866/dsc00681o.jpg[/IMG]\

Latest LED Park lights. no glass, all on an electronic board of LEDs!---- A$20

[IMG]http://img94.imageshack.us/img94/2323/dsc00682l.jpg[/IMG]

Interior Lights -- once again all on an electonic board of LEDs --- A$20. We don't stock the ones that have wires attached to them which would be left dangling in the plastic cover.

[IMG]http://img98.imageshack.us/img98/3720/dsc00684m.jpg[/IMG]

Philips part number: XD 288. Denso Part number: 85967-51050. These comes with a Standard 12month warranty but I will extend the warranty for P.WRX members to 18 mths.

Denso Hid Conversion Kit RRP $650 P.WRX price A$250.

[IMG]http://img4.imageshack.us/img4/8265/dsc00680r.jpg[/IMG]


Philips Xenon HID conversion kit
Product Listings Descrption
XD288 Conv. electronics XD288 85V
85901XM Conv. electronics 85901
858326K Conv. Bulb 9006 6000K 85832 P22d
858314K Conv. Bulb 9006 4200K85831 P22d
858166K Conv. Bulb H4 H/L 6000K 85816 P43
858154K Conv. Bulb H4 H/L 4200K 85815 P43
858146K Conv. Bulb H7 6000K 85814 PX20d
858134K Conv. Bulb H7 4200K 85813 PX20d
858106K Conv. Bulb H1 6000K 85810 P14.5s
858094K Conv. Bulb H1 4200K 85809 P14.5s
858296K Conv. bulb H11 85829 6K PGJ19-2
858284K Conv. bulb H3 85828 4K PK22s
858266K Conv. bulb 9005 85826 6K P20d
858234K Conv. bulb H11 85823 4K PGJ19-2
858224K Conv. bulb 9005 85822 4K P20d

RRP: A$450 12 mths warranty
P.WRX memebrs price: A$180 plus 18mths warranty except for H4 H/L. P.WRX Price for H4 H/L is $240.

Please go to: [url=http://www.lighting.philips.com.au/v2/automotive/productrange.jsp?id=1012984]Philips Lighting Australia - Xenon HID conversion kit[/url] and [url]http://www.lighting.philips.com.au/v2/automotive/productrange.jsp?id=1012984#0[/url] Look under product listings.

[IMG]http://img577.imageshack.us/img577/7540/dsc00585wq.jpg[/IMG]

[IMG]http://img189.imageshack.us/img189/5702/dsc00583dx.jpg[/IMG]

[IMG]http://img825.imageshack.us/img825/2930/dsc00617e.jpg[/IMG]

Philips Genuine replacement HID D2S, D2R globes P.wrx price -- A$85.

[IMG]http://img638.imageshack.us/img638/9692/dsc00678t.jpg[/IMG]

Philips Genuine Canbus compatible HID system -- works on ALL Canbus protocols including Benz, BMW, Audi, Landrover, Austin Martin, Ferrari, McClaren and Porsche --- A$240

thats cheap! eBay kits go for around the same price.

Might pay to list colour temps and bulb types available Mao.. ie: H4 -4300k temp etc etc

Thanks for the note. Will edit with part numbers and description.

Will get some info with photos between real and copies next week when I get back from myu trip. By the way, non genuine philips retailers will not be able to do the canbus protocol systems on the late model cars like Porsche, Benz and BMW. An error code will emerge.

For genuine Philips items, pls look here: [url]http://www.lighting.philips.com.au/v2/automotive/productrange.jsp?id=1012984#0[/url] Look under product listings.

Some fake philips sold online for A$150:

[IMG]http://t0.gstatic.com/images?q=tbn:ANd9GcRlowrpamu_PyGwkZrX3TgQMLAn9EawhH3bZBEtNZi3aR7_nT-HhA[/IMG]

[IMG]http://t1.gstatic.com/images?q=tbn:ANd9GcQwb54Ow2Xp9vcLnUzGnN3LVG44Bk7yGEAQGyzOp2Mt8Nm6LoNBpg[/IMG]

[IMG]http://t3.gstatic.com/images?q=tbn:ANd9GcQfufUgOMxYKVoEXaGymFdkSMOEi_0UXOWcKVhsfCtmNT4Ikh47[/IMG]

[IMG]http://t3.gstatic.com/images?q=tbn:ANd9GcQa2_EHZZd1HpmoyckG4NHppivD0wlOchG30BCZsR7tSy9k562hL7SbVTNEnQ[/IMG]

More daring online vendors who sell fake Philips for A$299:

[IMG]http://t0.gstatic.com/images?q=tbn:ANd9GcSYq0hkEzjsqZPcseITZO5hVR1_tnaCBWKt2wjBJIqpt9DJGFGG&t=1[/IMG]

New Stock Arrival! Buy Genuine Philips from local stockist with support and 18 mths warranty.

Note: All genuine Philips Hid conversion kits come with serial/batch and part numbers. Refer to above post for reference to Philips Australia website.

[IMG]http://img21.imageshack.us/img21/1154/dsc00744hc.jpg[/IMG]

Thanks for the globes Mao. Good price & good service.

No probs, you r too kind.

One more thing I forgot to mention, a lot of aftermarket kits come with AMP connectors for the globe to ballast. The genuine Philips globes I sold you were KET style type connectors. Should you have a problem, just bring your old globe in and we will cut and solder the connectors to suit.

Have a great weekend.

Jeez, they are some good prices. I bought some HID's for my last MY00 and they worked a treat. I'll definitely be looking at getting some more for the version 6.
Good work Mao.

[QUOTE=mao;576903]No probs, you r too kind.

One more thing I forgot to mention, a lot of aftermarket kits come with AMP connectors for the globe to ballast. The genuine Philips globes I sold you were KET style type connectors. Should you have a problem, just bring your old globe in and we will cut and solder the connectors to suit.

Have a great weekend.[/QUOTE]
Cheers Mao but already done that myself.

Excellent work.

[QUOTE=grumpyrex;576938]Cheers Mao but already done that myself.[/QUOTE]

Care and maintenance of Philips HID system.
 

Care and maintenance of Philips HID system:

1) When turning on the Philips HID system, always leave lights on for more than 3 minutes. This allows the capacitor in the ballast to charge up properly and thus will increase the lifespan of your hid system.

2) Always keep ballasts away from areas that will expose them to water and unnecessary moisture. Although Philips ballasts are water-resistant, keeping them in a dry area will increase their lifeline.

3) Always keep ballasts away from heat. Do not mount them near the abs motor, radiator, exhaust manifold and turbo.

4) Installation of globes with the exception of 9005 and 9006 should be done with the supplied seal fitted. This prevents moisture from getting into the headlights and onto the globe, thereby causing damage to both the globe and headlight lens itself.

re: 2001 Bugeye (using Philips Ballasts) JDM STi HID headlight conversion
 

Guys, we have managed to intergrate our Philips ballast with the stock JDM STi headlights and factory D2S globes.

Also we can fit the JDM headlights using the standard H4 harness.
In doing this, we are using back the factory bugeye harness, relays and fuses without requiring any further parts.

Below are pics of todays job we did on a P.WRX bugeye wrx:


Below: Wiring process --- unfinished.
[IMG]http://img830.imageshack.us/img830/4146/dsc00775g.jpg[/IMG]


Below: More wiring in progress.
[IMG]http://img854.imageshack.us/img854/1464/dsc00776ni.jpg[/IMG]


Below: More wiring almost there.
[IMG]http://img24.imageshack.us/img24/6738/dsc00777so.jpg[/IMG]


Below: Finished Product!
[IMG]http://img90.imageshack.us/img90/3931/dsc00778e.jpg[/IMG]


Below: Factory park lights with JDM factory HID globes turned on.
[IMG]http://img691.imageshack.us/img691/1739/dsc00781fw.jpg[/IMG]


Below: Factory parklights with factory HID globes with high beam turned on:
[IMG]http://img41.imageshack.us/img41/4884/dsc00782ll.jpg[/IMG]

hey mao just me again, i hope you are not sick of me asking so much but be sure that it will pay off for you ok?!

just wondering if you could get in the phillips extreme vision globes?

btw mao, would you be free this tuesday? i wanted to pop in to discuss your services ect and properly meet you. i know you were busy the other time i went in :)

yas

Hi yas,

Ask anything you want. It is part of my job.

Yes would be able to get you the extreme vision globes, will chk it up with philips Australia in the next few days. Havnt stocked any of that before.

Be leaving for Japan on Wednesday for a week and we are getting the 4-poster installed tmr, so might be a little bz tmr, but hey, just drop in and will fine some time for a chat.

any reason for not stocking them not popular or something? it was just sought of a suggestion + i think poeple on here have used them before and said that they were good. i know hid's are much better but just the cost factor as these globes are not even $100. then again hid will last longer ect so i will have to do some thinking and research :)

thank you for helping

Polarg M4 Park lights. These are produced by Nissei Industries in Japan and are rated at 5000k. These are Canbus compatible and suitable for all Subaru models. As usual, these are made in Japan and top quality.

P.WRX Price -- A$15

[IMG]http://img35.imageshack.us/img35/6646/dsc01035gx.jpg[/IMG]
[IMG]http://img685.imageshack.us/img685/5278/dsc01036i.jpg[/IMG]

On my setup, the HIDS turn off when high beams are on. Is this normal/how it's meant to be?

Can you supply/install HID's to a set of Hella Rally 2000's? Can send price via PM if you like.

If so, may have multiple sets ready to go

PM sent.

[QUOTE=Adz;595511]Can you supply/install HID's to a set of Hella Rally 2000's? Can send price via PM if you like.

If so, may have multiple sets ready to go[/QUOTE]

[IMG]http://img64.imageshack.us/img64/1965/img00611g.jpg[/IMG] Phillips set installed.

Hids are in mate, thanks again
:)

hi mate, do you have t10 smd bulbs for clusters? cheers

Hey Mao,

What would it cost for you to install the Parker LED, Interior LED, and Phillips h4 (i think) HID KIT into my car while its there? :)

Red theme in mind :P not sure if any HID's/Led's come with that sort of colour/temp though?

Also is it okay to install HID's into my stock reflective bug eye's? or is it worth buying the sti projector style ones?

Thanks Mate,
Matt

PM sent

Mao, your inbox is full.

k deleted and sending you PM now.

Hi mao,

I would like a set of the LED park lights to suit MY02 Projector headlights (small thin connector) latest LED and Canbus protocol compatible park lights.

Cheers

PM Sent

Hi Mao,
Do you have Philips low beam HID kits to fit a 2008 Impreza Sti hatchback (GR -current shape 2008-2011) ? I already have the HID high beams as standard. Price? Any soldering or crimping required or is it a plug and play?

PnP but a bit of cosmetics required. Will show u or give u a hand to fit them in. EZ, PZ, japanezy.

Have em in stock.

[QUOTE=Superoo;600903]Hi Mao,
Do you have Philips low beam HID kits to fit a 2008 Impreza Sti hatchback (GR -current shape 2008-2011) ? I already have the HID high beams as standard. Price? Any soldering or crimping required or is it a plug and play?[/QUOTE]

Hi Mao, just wondering if u have any H1 kits available

Sorry Din, missed your msg today. Hard to be in front of the computer screen and work on cars at the same time.

Anyway, it was great meeting you today. Hope everything goes well with the Philips H1. Don't forget the 18mth warranty applies.

Thanks agan,
Mao

Pm sent Mao

ok. PM sent.

Thanks once again for all your support.

We are currently out of H4 4200K. Orders have been placed and will arrive in 2 weeks.
We however still have the 858166K H4 6000K Kit on stock.

Regards,
Mao

The following is the install of LED interior and license plate lights on the Subaru GDB STi.

Products ---- Left is the Super Bright LED light from Polarg Japan and Right is the factory glass globe:
[IMG]http://img225.imageshack.us/img225/3442/dsc01178hx.jpg[/IMG]

Front Interior Lights Before:
[IMG]http://img844.imageshack.us/img844/9102/dsc01183k.jpg[/IMG]

Front Interior Lights After:
[IMG]http://img844.imageshack.us/img844/9411/dsc01182ds.jpg[/IMG]
[IMG]http://img200.imageshack.us/img200/7950/dsc01175n.jpg[/IMG]
[IMG]http://img641.imageshack.us/img641/8047/dsc01173ht.jpg[/IMG]

With Cover:
[IMG]http://img200.imageshack.us/img200/7950/dsc01175n.jpg[/IMG]

Trick to get your front interior light brighter --- gently remove both metal reflectors:
[IMG]http://img703.imageshack.us/img703/5696/dsc01184nb.jpg[/IMG]

Centre interior LED install:
[IMG]http://img508.imageshack.us/img508/2055/dsc01176g.jpg[/IMG]
[IMG]http://img64.imageshack.us/img64/916/dsc01177eo.jpg[/IMG]

Rear Number Plate LED install.
Centre interior LED product: Polarg LED T10 Globe:
[IMG]http://img706.imageshack.us/img706/269/dsc01190qo.jpg[/IMG]

Use a philips driver and remove the 4 screws holding the 2 rear license plate globe housings:
[IMG]http://img508.imageshack.us/img508/37/dsc01187q.jpg[/IMG]

This is how the light housing should look like when removed:
[IMG]http://img853.imageshack.us/img853/6867/dsc01189d.jpg[/IMG]

Before install (note only one side shown here):
[IMG]http://img9.imageshack.us/img9/4274/dsc01188ca.jpg[/IMG]

After install:
[IMG]http://img18.imageshack.us/img18/3937/dsc01197ts.jpg[/IMG]

Difference between factory globe (left) and Polarg Japan LED (right):
[IMG]http://img43.imageshack.us/img43/2425/dsc01195bu.jpg[/IMG]

Final Result:
[IMG]http://img651.imageshack.us/img651/600/dsc01206u.jpg[/IMG]

HID enquiry
 

PM sent.

PM sent.

[QUOTE=JD.WRX;609249]PM sent.[/QUOTE]

Just got my HID kit from Mao, great service looks amazing! Got all the LEDs changed aswell, post photos shortly!

Thanks for the kind remarks. Was a pleasure working on your car.

Below are picks from today on your Subaru BL Legacy.

Philips H7 6000K Hid kit installed with Polarg Park lights (note how bright the hids are in the daytime):
[IMG]http://img197.imageshack.us/img197/9361/dsc01250ni.jpg[/IMG]

Interior Lights used -- Polarg Canbus LED lights so as not to trigger any error light (note the Canbus chip on the circuit board) Sorry for the poor pics will update ASAP:
[IMG]http://img199.imageshack.us/img199/5484/dsc01242h.jpg[/IMG]
[IMG]http://img88.imageshack.us/img88/7675/dsc01241y.jpg[/IMG]

Below: Right side with Polarg LED , Right side is factory globe:
[IMG]http://img199.imageshack.us/img199/4192/dsc01240yd.jpg[/IMG]

Legacy Centre Interior Light after installation of Polarg LED (note plastic cover not placed back yet):
[IMG]http://img52.imageshack.us/img52/7001/dsc01248zd.jpg[/IMG]

Rear License Plate lights was a bit troublesome as the boot carpet had to be removed to chg the globes on the BL Legacy:
[IMG]http://img204.imageshack.us/img204/3566/dsc01244g.jpg[/IMG]

Product used was Polarg LED:
[IMG]http://img706.imageshack.us/img706/269/dsc01190qo.jpg[/IMG]

Below is pic of left Polarg LED light vs right side factory globe:
[IMG]http://img571.imageshack.us/img571/4593/dsc01246hb.jpg[/IMG]

Because the rear license plate light on the BL Legacy is directed to the side, this is the side shot of the Polarg LED light installed for you to see how bright it is even in the day light:
[IMG]http://img851.imageshack.us/img851/476/dsc01247y.jpg[/IMG]