Guys

Just looking for a bit of advice.
I am currently trying to sell my 99Sti (wife says it must go baby on the way)

Problem is i noticed a rattle a couple of weeks ago and on getting it checked it looks like the big end is shot.

What are my options? rebuild? bottom end? crate motor?

any help is appreciated.

Cheers

PS anyone looking for a 2 door with shot bottom end

how much you chasing mate?
send me a PM

Your best bet is a new bottom end...EJ207 short motor (just the block, no ancillaries or heads) straight from the crate.

Costs the same as rebuilding your stock motor by the time you factor in labour and parts, and costs a lot less than a proper performance rebuild.

That, or a 2nd hand motor from somewhere like JWS, or on the forums.

Ballistic

Where do i start looking for a crate bottom end?

Cheers

Bearing in mind what the car is I think you would turn alot of people away if you did the rebuild on the cheap. i.e cheap secondhand wrx motor.

Do what Joe suggested any buy an MY02 sti bottom end and bolt all your existing bits on.

From memory (exchange rate may have hiked prices if you cant find old stock) but you are looking at about $3800 for the motor and about $600 for all the gaskets and an oil pump. This is all ex labor.

Brendon

__________________
Losing is worse than death. You have to live with losing....

Urabus, even though i am selling i wouldnt do it on the cheap, its a clasic and i couldnt do that to my baby

i have just had a ej207 fitted. depending on how bad the damage is you may need your heads looked at and cleaned up

__________________
Werewolf Barmitzvah.....

Could advertise as is. Known problem will cost me x amount to fix and based on that selling for this price. Leave the new owner with the option of going as cheep or as silly as they like.

If I was thinking about building something up would certainly consider a car that the motor is coming out anyway.

No bites in a week or so get the thing fixed how you see fit.

__________________
Stoner & Webber 2011 World Champions

To give you an idea, RMS does a drive in-drive out service using a new ej207 bottom end, completely recond heads ( valves faced, blasted, seats cut, heads faced, blasted and pressure tested ) with new timing belt, seals, gaskets, recond oil pump, new water pump, spark plugs, thermostat etc etc for approx $7800 including all lubricants, coolants and filter. Additional items are usually hoses, belts and clutch plus your heads MAY need valve guides.
This comes with a 6 month 10,000KM warranty ( subject to conditions ).
Or we can supply a bottom end EJ207 for $3500

Cheers
Ken

__________________
Damn, I have no signature !

PM Sent