|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Death rattle??? :(
Hey guys and gals,
just want to confirm that i have lost a main bearing before i start investing my hard earned on a new motor... let me know what you think : Steve
__________________
Long live the Classic! MY99 - 245hp & 360Nm.......Best ET - 12.771s |
#2
|
||||
|
||||
It could be the poor audio quality but that doesn't sound like a dead big end bearing to me.
__________________
RS Liberty - Because WRX's are only good for parts... |
#3
|
||||
|
||||
Possibly best idea is to confirm your worries with a reputable workshop,
rather than assumptions based on poor quality video/audio.
__________________
345hp @ 1.4bar |
#4
|
||||
|
||||
yeah what they said, doesnt sound like it too me but might be early stages.
|
#5
|
||||
|
||||
got oil in it? :P
__________________
[S]kid[S] |
#6
|
||||
|
||||
Get a long screw driver and use it as a stethoscope.
Stick one end on all your rotating gear like alternator and power steering. And stick it between the alternator and AC compressor onto the top of the block. Put the handle against your ear and see where the noise gets real loud from. You can normally hear a bottom end rattle louder through the sump than you can from the top of the engine bay... And clean that oil up thats sprayed under your car... =)
__________________
Balls. |
#7
|
||||
|
||||
Sounds like top end noise to me?
Dropped a valve shim?
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#8
|
||||
|
||||
Quote:
X2
__________________
11.1 @ 127mph |
#9
|
||||
|
||||
cheers for the opinions guys....i was just about to drop the oil to confirm bearing particles in the oil, when my brother asked if the harmonic balancer was meant to wobble........who would have thought an apprentice mechanic could be useful
so it seems my issue was a very loose harmonic balancer, it had jumped off the key of the shaft. its chewed out the balancer...hopefully a simple replacement should fix the problem.. So has anyone got a harmonic balancer for a 99wrx, new or used. Thanks, Steve.
__________________
Long live the Classic! MY99 - 245hp & 360Nm.......Best ET - 12.771s |
Tags |
death, rattle |
|
|