|
|
LinkBack | Thread Tools | Display Modes |
#31
|
||||
|
||||
Have you changed the batteries over?
Get the right one as per the battery number in the Owner's handbook. This battery will not be available form any pharmacy or dick smith. These places sell a similar battery but of a smaller size that will not work optimally. You have to go to Battery World or Subaru to get the battery. And while you are at it, take some contact cleaner and clean the battery terminals in the remote. Otherwise, drop by with the correct replacement battery, and I will be glad to sort it out for ya free of charge, but no promises --- could be the Brant unit itself (most of the time it is the battery in the remote. Although you have a spare, but the battery in it has been already there for quite sometime too.) Regards, Mao/ Evo R Quote:
|
#32
|
||||
|
||||
Same problem, sometimes not always alarm will disarm (Can see the indicators flash) but door will not unlock
So its not the car batt as this is new and clearly working Its not the remote batt as it disarms the alarm Any ideas? As I said, sometimes it works sometimes it doesnt ? very female! 97 GC8 aftermarket alarm and im guessing central locking |
#33
|
||||
|
||||
From memory its a cr2016. Got mine from dick smith.
Btw I had the exact same problem on a cold morning. Took me 20 goes to unlock car. Replaced both key batteries haven't had problem since. using the Perth-WRX mobile app
__________________
wrxy comes later.. |
#34
|
||||
|
||||
But was ur alarm disarming ok but ur central was not unlocking?
Sounds like your issue was just the batts in the keys - (no disarming no unlocking) |
#35
|
||||
|
||||
Yeah I was responding to the first two guys. Phone didnt refresh in time.
__________________
wrxy comes later.. Last edited by Toohey; 24-06-2014 at 12:55 AM. |
Tags |
central, locking, problem |
|
|