|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Seat issue.
Hi guys,
Just starting to tick off bits and pieces that need doing. My car had sti seats when I bought it, but wernt included in sale, so now thats its running they have come out. Problem is during install/removal of the seats, the thread at the front bolt hole on the passanger seat has been ruined which means I cant get a bolt in there to fully secure the seat. Ideas to resolve this? Thanks.
__________________
I am only an asshole on the internet :) [SIGPIC][/SIGPIC] |
#2
|
||||
|
||||
go buy a tap set from a tool supplier and run that through it.. If its only cross threaded you should be able to clean it up..
If not you will need to get a helicoil kit and do that.
__________________
I used to tune cars with screwdrivers. Clutch, Brake, Accelerate. |
#4
|
||||
|
||||
Not entirely sure how ruined it is, but it definitely wont take a bolt.
__________________
I am only an asshole on the internet :) [SIGPIC][/SIGPIC] |
#5
|
||||
|
||||
retap should work.. tap would prolly be 20 or so bucks.. then spray some crc in the hole and run the tap through.. going a turn forward then half a turn back adding some crc ever 3 or 4 turns until you are all the way through
__________________
I used to tune cars with screwdrivers. Clutch, Brake, Accelerate. |
#6
|
||||
|
||||
+3 For tapping it. I had a similar problem with my underbody H brace. The bolt would go in but would not "catch" the thread inside what so ever so ended up tapping it.
__________________
....slow and steady wins the race....fark that!! |
#7
|
||||
|
||||
You can get a whole Supercrap / Bunnings tap & die set for about $30.
For occasional use they're fine. If that fails, find someone who has a Rivnut set.
__________________
A nation of sheep will beget a government of wolves. Last edited by AWDmoke; 19-07-2009 at 07:45 PM. Reason: spelling |
#8
|
||||
|
||||
If your going collie i have a set of taps you can borrow/use
|
#9
|
||||
|
||||
Andy just filled me in.. apparently its not a ruined thread, its actually ripped the whole bit apart.
Crap.
__________________
I am only an asshole on the internet :) [SIGPIC][/SIGPIC] |
#10
|
||||
|
||||
__________________
MY93 Impreza GX 1.8L, 0hp, 0nm |
Tags |
issue, seat |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Odd engine/rev issue | daggyboy | Mechanicals | 19 | 30-07-2008 05:54 PM |
Squeaky Seat - Warranty issue?? | Zombee | General Subaru Discussion | 3 | 04-05-2008 09:23 PM |
Seat rails for fixed back bucket seat (buddy club) | WhiteRX | Wanted | 0 | 05-09-2007 02:32 PM |
Bugeye issue | OllieJ | Mechanicals | 1 | 21-03-2007 10:33 PM |
Hot 4s Back issue!!! | MY 01 WRX | Wanted | 0 | 05-01-2007 02:44 PM |