Hey everyone, got a bit of an odd problem here, i am in the process of putting my own projector HID lights in my peanut headlights following a DIY from rexnet.

http://www.rexnet.com.au/forum/index...2&hl=projector

i just removed my headlights and i have found the passenger side (LHS) housing is half melted underneath...
It already has an after market HID kit and the ballast was mounted directly underneath the headlight (see pic bellow)
Could the ballast of melted the case?
or could it be because the headlights have been blackened therefor have been pulled apart in the past and the person doing it melted it in the ovan?



Pick of the melted light with good light behind



Is there anyway to repair it enough to do the HID projector conversion and stop all water getting inside? or is time to find a new/second hand case, if a new/second hand one is needed, where could i purchase just a case, or do i need to buy the whole thing?

any info would be greatly appreciated - let me know if more pics are required

Get a replacement one.
Start by calling Japanese wholesale spares (JWS).


EDIT: just remembered you're in K-town.
Either way, give Japanese wholesale spares a shot, and courier it up. Or PM me and I'll bring it up next swing.

__________________
Signarape!

Ok, in search of a new headlight, just gave JWS a call and they dont have any in stock second hand, list of other places i can call? or do i need to go and get a brand new set

Thanks for the above info, i agree BALISTC

For a start, assuming the ballast in the picture above is your actual ballast, ballasts don't get THAT hot.. and even if it did, you'd think that all the surrounding connectors and rubber bits in the photo would have melted also.. and the paper sticker on the ballast would be at least discoloured.

Secondly, the sikaflex sealing the headlight looks to be intact.. that would have melted and dripped out also.

Thirdly, the headlight seems melted over a larger area than the ballast actually covers, so it probably melted in the oven.

Get a replacement headlight.

Ajayjay.spec lights.

LOLs this what could happen to Karrinas.. ahha

New headlight theres none around seconhand.. I think there around 300 each from subaru..

__________________
I'm a jockey kunts...

Depending on condition, you may be able to source one from a wrecker that's been damaged 'i.e cracked lens', for free or next to nothing!

Say something along the lines of 'Need something that's still structurally intact', as I'm moulding a widebody or new from end set up, but I don't want to damage my existing headlights.

P.S: Back Story on AJAYJAY spec lights?

__________________
[SIGPIC][/SIGPIC]

i was just looking at your headlights, it appears that it has been burned or somehow exposed to extreme heat.....pretty interesting......

__________________
Nissan 350GT V35 - Current
Evo VIII MR 2004- Sold
Honda CR-V 2002- Sold
Subaru WRX 2001- Sold
Nissan 180SX 1993 - Sold
Ford Laser 1995 - Sold

750 dolla for a single headlight from Subaru... no thanks.

ill be searching wreckers etc for a second hand one, all i need is the case really, if anyone knows a good place to try, im all ears

Someone put your headlights in an oven? Replace them.
Hell, replace the whole car, what if they put the ecu in the Microwave too?

yer forget Subaru at those prices! wreckers / importers ftw.