|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Its funny you're posting this as i literally failed the pits today for the exact same thing (coilovers)
I know ive posted before saying nah nah you can definitely pass with coilovers thats all BS, and now im eating my words. i'm on pretty good terms with my inspector and he explained it all to me and even showed me the document that they received from DPI/main roads a few months ago.. it pretty much went to every inspection place stating theres a change in legislation and that ALL coilovers will fail if not engineered/certified prior to the sticker inspection......... needless to say i was like 'fuck'. apparently they are being extremely strict on them and inspectors will be terminated if they don't follow it (obviously) also did all the running around today to see what was needed and long story short it was definitely not worth the effort... picking up stock struts off stevelang tomorrow.. haha Quote:
Inspector also told me (unsure of truth?) that only way they will engineer them is if they cannot wind down far enough to make the car lower than 100mm.. so most people apparently weld a bead around them to stop it.. but why the shit would i want coilovers if i cant slam the car. :P
__________________
MY11 WRX STi [SITDOWN] Last edited by chevZ; 07-03-2013 at 07:41 PM. |
#2
|
||||
|
||||
Quote:
Also, if an engineer has engineered a certain type (brand/model) of coilover in the past why do they need to engineer the bloody thing again? database of approved brands would be a good idea. |
#3
|
||||
|
||||
Quote:
- got sticker, thought meh can clear with coilovers.. why not! its not even slammed either! - inspector said its not too low but he really wants to pass me but he'll lose his job with how strict it is on coilovers at the moment - showed me the document: pretty much saying all inspection agencies are going to get reemed if they pass a single car with coilovers and no engineers cert. - gave me the phone number for Vehicle Safety Services welshpool (who authorise mods) advised good luck calling them though you shuold write to them. - called them up, sat on hold for 20minutes got transferred 4 times total and eventually someone (narky bitch) told me the process for what ill need to do and it was this: *Print application off transport.wa.gov.au *Mail in to vehicle safety services (snail mail only) *Wait for confirmation and then they will review it and send an approval in principal (assuming your request/modification is 100% within specification) *Once you get an approval in principal you can 'apply' the modification to the car legally * you then have a specific timeframe to get to a licenced engineer which will cost you additional money to your initial pre-approval application * the engineer will review the modification in full and if approved will provide you with another certificate stating it's all good - this will cost you additional money also * you can then take this certificate when you go to get the yellow sticker removed and they will pass this aspect of the modification/s. Honestly its probably not a nightmare of running around if you love/care about your car enough but I tend to go through cars quite often and considering if you're anything like me you return the car to stock to sell it, you probably don't want to waste this much time/money on it. Also the biggest "nah im not doing this" to me was the fact that this doesnt take into account if you've already got a yellow, you're under the pump time wise as it is.... if you havnt been stickered yet then may be less effort required haha Oh and i forgot to add (but i said previously) inspector told me dont waste your time trying to engineer it if the coilover winds down to the point where your car will be 100mm or less from the ground.
__________________
MY11 WRX STi [SITDOWN] Last edited by chevZ; 07-03-2013 at 08:33 PM. |
#4
|
||||
|
||||
Quote:
So what your saying is that they can't even be engineered? Looks like I will be sourcing some struts and springs then.. They may aswell make them an illegal product.. Is it possible to get them certified by one of the approved engineers on the dpi website and bring in the cert to the pits without filling out the mod approval ap. I don't get what mod approval ap is for when they end up inspecting it and writing you out a dpi mod permit anyway? |
Tags |
mod, mods, permit, pits |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
does any one know if role centre adjuster are legal for the pits to pass you? | Wrx_92 | Mechanicals | 23 | 29-11-2011 04:22 PM |
Pits | BOMB3R | General Subaru Discussion | 39 | 22-12-2006 07:09 PM |