|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
coilover setup
im sure this question gets asked numerous amounts of time!!!
can someone please help me, i am driving around with STD street and track coilovers (the ones that are mainly street built ones) that are blue with a yellow spring im feeling the bumps quick badly in the car (sometimes car might bounce a bit after i have gone over a dimple in the road, etc) can someone please tell me what their settings are for damper (how many clicks from soft/hard) and preload (what line it is on the coilover or the amount in mm) for the front and rear i appreciate everyones advice, i know they are new so they are just wearing in but sometimes its uncomfortable! Josh
__________________
2002 WRX (GDA) BUGEYE, 204BHP at 290Nm, daily driven --MODS-- --> Walbro 255LPH fuel pump --> Grimmspeed 3 port EBCS --> 3" turbo back exhaust --> Catless up pipe |
#2
|
||||
|
||||
I went for 2 clicks from softest for both front and back at the start and then gradually moved to 6/7
using the Perth-WRX mobile app
__________________
02STi - Vipec, Oval Varex, APS CAI with K&N Filter, Walbro 255L, 53MM Koyorad & STD Coilover 19.5psi tune 271.6HP@6000 351.3NM@4700 |
The Following User Says Thank You to mavx4 For This Useful Post: | ||
joshwrx (26-12-2013) |
#3
|
||||
|
||||
thanks mate!!
__________________
2002 WRX (GDA) BUGEYE, 204BHP at 290Nm, daily driven --MODS-- --> Walbro 255LPH fuel pump --> Grimmspeed 3 port EBCS --> 3" turbo back exhaust --> Catless up pipe |
#4
|
||||
|
||||
Correct me if im wrong, but Im pretty sure the damping knob on top adjusts the rebound. More damping, the slower the coilover returns to full stroke. You will have to adjust the spring rate to get it softer. If you slow the coilovers right down you will find it wont feel as solid over ruff stuff.
__________________
The one perkent... |
#5
|
||||
|
||||
I have my set to 6 for normal driving because when it is set to really soft the car tends to bounce.
|
#6
|
||||
|
||||
^ This. In my opinion anything Lower than 5 & you may as well go back to Factory... Got mine currently set at 7. For Track Days or when i feel like enjoying the Road, i'll tend to set it at 9-12 for f+r.
__________________
2018 Nationally Accredited Silver CAMS Photographer Having a modern day PC without an SSD is like hiring a hooker for hugs....... Last edited by Slap Dash; 26-12-2013 at 08:01 PM. |
#7
|
||||
|
||||
thanks guys! does anyone know what they roughly run as the spring preload? mines 10mm preload at the moment
@tony, how you talk about spring rate and lowering it, you mean the actual spring? im running 8/6k
__________________
2002 WRX (GDA) BUGEYE, 204BHP at 290Nm, daily driven --MODS-- --> Walbro 255LPH fuel pump --> Grimmspeed 3 port EBCS --> 3" turbo back exhaust --> Catless up pipe |
#8
|
||||
|
||||
Yeh. It should he printed in the spring how many pound it is. But If you get new springs with a lower weight you have to make sure they have equal or more stroke of the shock otherwise it will bind up. TBH the coilovers are sold specific for your car so you should he able to tune the roughness out using the damping as the spring should be the correct weight.
__________________
The one perkent... |
#9
|
||||
|
||||
My Std is 8kgmm allround.
I set my preload by setting height, then tighten the spring until reasonably hard to rotate. I think people tend to underlook tyre presure, when pressure is too high, it produces high damping force. I set mine 2psi higher than oem recommended, set damping to 4. Ride and handles pretty good. using the Perth-WRX mobile app
__________________
MY08 STI 422whp at 1.5bar on E85, built by Diversion Garage, assembled and tuned by EvoR Update from new owner: 375whp at 1.4bar on 98, at Tokyo Motorsport Last edited by s20525xxx; 26-12-2013 at 10:57 PM. |
#10
|
||||
|
||||
thanks to all, ive been playing around with it and its slowly getting there! damps on 6 is pretty good so far!
__________________
2002 WRX (GDA) BUGEYE, 204BHP at 290Nm, daily driven --MODS-- --> Walbro 255LPH fuel pump --> Grimmspeed 3 port EBCS --> 3" turbo back exhaust --> Catless up pipe |
Tags |
coilover, setup |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Aquarium Tank Setup | HaiiSon | The Quokka | 2 | 10-11-2013 11:39 PM |
Coilover life span? | Bob | Mechanicals | 9 | 01-06-2011 04:30 PM |
For sale!! Xyz coilover kit to fit 99 forester gt-5 months old | 99 FORESTER GT | For Sale | 5 | 04-12-2010 06:31 PM |
FS: Coilover C-spanners | slikwrx | The Former Workshops Forum | 0 | 28-08-2007 06:28 PM |
FS: Front Mount Full Setup for FORESTER GT | my99styles | For Sale | 0 | 27-07-2005 10:06 AM |