just down to the cat,
the roll of stuff is 50 bucks a roll, i needed one roll. and chee can you explain how a flexible heat insulating material is prone to cracking? |
for $50 roll.. must be some pretty crap stuff..
There is only 1 heat wrap you should use - and that is the thermotech stuff |
[QUOTE=werticusness]just down to the cat,
the roll of stuff is 50 bucks a roll, i needed one roll. and chee can you explain how a flexible heat insulating material is prone to cracking?[/QUOTE] I thought it is the pipe which the wrap is covering may crack. not the wrap its self, have heard mixed story's though. |
the actual piping or welds is prone to cracking.
|
[QUOTE=chee]the actual piping or welds is prone to cracking.[/QUOTE]
only if it was shit to start with. |
[QUOTE=waxdass]for $50 roll.. must be some pretty crap stuff..
There is only 1 heat wrap you should use - and that is the thermotech stuff[/QUOTE] Theres some of that thermotech stuff going on ebay for $40 for 25ft and $70 for 50ft. All one inch wide... [url]http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=009&item=190043756420&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1[/url] [url]http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=009&item=190043753008&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1[/url] |
how many feet do you need for a dump pipe? 25 or 50ft?
|
25 ft equals around 7M. I think that would be more than enough for just a dump pipe.
25 ft should be enough for a set of 4cyl header, but you would need the 50ft one for maybe 5cyl and v8s... |
if your serious about header wrapping, you should be starting at the headers and working back, all up i used about 4x 50mm thermotec rolls for my entire exhaust system, i also found it much easier (and quicker) to remove the entire exhaust (inc headers) to wrap them tight and neat enough. i also used hose clamps on medium tension to hold the start and finish portions of the wrapping. (makes for easy removal later on).
|
you guys aren't thinking of wrapping the factory cast manifold are you?
I don't think it would be necessary, aftermarket headers, ceramic coat, wrap, silicone coat, done. benifits of wrapping post turbo? Other than heat protection.... |
All times are GMT +8. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO