Hey Guys,

I'm just wondering if the rear hubs from a MY05 wrx can be fitted to a MY99 wrx? Are they a direct swap or will I run into problems?


Cheers

__________________
MY06 STi

From memory the GD chassis has a wider rear track opposed to the GC8 being narrow.

Someone can clarify this though. It's can be done

Paging Riceman1991 / Rhys

using the Perth-WRX mobile app

__________________
2005 WRX STI

i did the whole lot, hubs shafts and diff from 06 sti.

Im not sure if just the hubs will go on by themselves.

__________________
:)

Track difference is in the arms

As for the hub as long as. Its. R160 it shouldn't be a problem I have used both


brake set up maybe different depending on what's on your car now if you have 2pots will bolt up if not you will need to get a set and the correct discs


The only thing I'm not 100% on is the abs sensor

Msg Strubaru he did the swap on his foz of same age



using the Perth-WRX mobile app

Can confirm the arms are different length, GD lateral arms are about 1/2" longer than GC. Otherwise, pretty much identical.

Learnt that the hard way :S

__________________
Slow is smooth and smooth is fast.

This is what I wasn't sure about. The ABS. I'm hoping to get away with just swapping hubs only as the bearings on my WRX are fubar.

__________________
MY06 STi